Toon firmware - update script

Forum about the Toon firmware, and its extensions

Moderators: marcelr, TheHogNL, TerrorSource, Toonz

Re: Toon firmware - update script

Postby TheHogNL » Sun Sep 08, 2019 6:03 pm

A toon 1 is always reporting that their is no space to install but always continues. Quby did put this check in the script but for now they only log it but don't quit.

Also, there is no way a toon 1 can get a firmware upgrade if it respect that warning message.

In fact, during the upgrade the toon itself compresses it file system all the time and for most updates there is just about enough space to install the update. Only from firmware earlier then 5, when upgraded to 5.6 or higher will cause a disk full during upgrade. Therefore, there is now a 5.0.6 intermediate update necessary for those updates.
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1078
Joined: August 2017

Re: Toon firmware - update script

Postby abb » Sun Sep 08, 2019 6:55 pm

OK thanks, that is clear and then, I will attempt to upgrade my toon 1. If I w any to create some space for applications, what are the usual locations where you can free up some space?
abb
Starting Member
Starting Member
 
Posts: 3
Joined: September 2019

Re: Toon firmware - update script

Postby TheHogNL » Sun Sep 08, 2019 6:58 pm

On a toon1 you can only install 3 or max 4 application due to memory restrictions. Way before any disk storage issue's will start.
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1078
Joined: August 2017

Previous

Return to Toon Firmware

Who is online

Users browsing this forum: No registered users and 0 guests