Page 28 of 44
Re: Toon firmware - update script
Posted: Wed Feb 20, 2019 12:58 pm
by TheHogNL
Don't understand your question. You just need to update to 5.0.4 as the message is telling you
Re: Toon firmware - update script
Posted: Wed Feb 20, 2019 1:24 pm
by BaZnGa
I have do this script first:
Code: Select all
curl -Nks https://raw.githubusercontent.com/IgorYbema/update-rooted/master/update-rooted.sh -o /root/update-rooted.sh
Then i have do this one:
But i got this message:
https://notepad.pw/share/xxfhxtqi1
So what i would like to try is, delete those files witch Toon have been downloaded, and try it again because i will get this error:
Code: Select all
===================================================================================================================================================================
Welcome to the rooted Toon upgrade script. This script will try to upgrade your Toon using your original connection with Eneco. It will start the VPN if necessary.
Please be advised that running this script is at your own risk!
Version: 3.62 - TheHogNL & TerrorSource & yjb - 18-2-2019
If you like the update script for rooted toons you can support me. Any donation is welcome and helps me developing the script even more.
https://paypal.me/pools/c/8bU3eQp1Jt
===================================================================================================================================================================
Your Toon already tried downloading version 5.0.4 before. Need to force this version!
iptables: Chain already exists.
Tunnel is alive and configured.
Warning: upgrade script from Eneco server is changed. Do you want to continue downloading the files (if not sure, type no and report in the forums)?
yes
Upgrade script downloaded. We need to download the upgrade files first. No upgrade is done yet. Do you want me to download the files (yes) or quit (anything else)?
yes
Starting the upgrade prepare option which downloads all necessary files. No upgrade is done yet.
Killing process... took to long!s takes a minute or two .
Prepare failed. Please check the logs at /mnt/data/update/upgrade-qb2.sh.log
Quitting the upgrade. It was a nice try tho...
Re: Toon firmware - update script
Posted: Wed Feb 20, 2019 2:31 pm
by WickedMaster
Post the output of /mnt/data/update/upgrade-qb2.sh.log
Re: Toon firmware - update script
Posted: Wed Feb 20, 2019 2:34 pm
by BaZnGa
WickedMaster wrote:Post the output of /mnt/data/update/upgrade-qb2.sh.log
How can i download it? Because its a file with 4440 rules.
Re: Toon firmware - update script
Posted: Wed Feb 20, 2019 3:50 pm
by TheHogNL
Updates are broken current. Eneco/Quby script is having some bugs...
Re: Toon firmware - update script
Posted: Wed Feb 20, 2019 4:25 pm
by BaZnGa
TheHogNL wrote:Updates are broken current. Eneco/Quby script is having some bugs...
Thanks for the update!
I will try it in a couple more days again.
Re: Toon firmware - update script
Posted: Wed Feb 20, 2019 5:57 pm
by TheHogNL
I have currently disabled all updates in the newest script update (script version 3.63). When everything is working again I'll create a new version.
Re: Toon firmware - update script
Posted: Wed Feb 20, 2019 11:16 pm
by WickedMaster
I just updated from 4.22.7 through the official way of updating (Toon software update). Seems like it's working sometimes.
Edit: The Toon has been crashed while doing the official update. Will have a look at it tomorrow.
Re: Toon firmware - update script
Posted: Sat Feb 23, 2019 1:17 pm
by Markie13
Hi all,
I have a question about the update script. I have aborted yesterday the update script by entering quit. The script has already downloaded the new 5.0.4. Today I wanna proceed but now the script crash after the message that 5.0.4 is already downloaded with a lot of vertical Y.
My question is; where does the script store downloads so I can remove firmware 5.0.4 to start over again.
Thanks
Re: Toon firmware - update script
Posted: Sat Feb 23, 2019 1:20 pm
by TerrorSource
Markie13 wrote:Hi all,
I have a question about the update script. I have aborted yesterday the update script by entering quit. The script has already downloaded the new 5.0.4. Today I wanna proceed but now the script crash after the message that 5.0.4 is already downloaded with a lot of vertical Y.
My question is; where does the script store downloads so I can remove firmware 5.0.4 to start over again.
Thanks
as mentioned a few times in this topic and on the forum. these 2 locationed are the update files located
\HCBv2\tmp\opkg-cache\ - before 4.x.x
\mnt\data\update\ - after 4.x.x
Re: Toon firmware - update script
Posted: Sat Feb 23, 2019 1:41 pm
by TheHogNL
Markie13 wrote:Hi all,
I have a question about the update script. I have aborted yesterday the update script by entering quit. The script has already downloaded the new 5.0.4. Today I wanna proceed but now the script crash after the message that 5.0.4 is already downloaded with a lot of vertical Y.
My question is; where does the script store downloads so I can remove firmware 5.0.4 to start over again.
Thanks
Can you post that 'vertical Y' logs? Don't understand where that is coming from.
Removing the download files doesn't help. As soon as the Toon has started a version download the OPKG package information is stored and can not simply be removed. It should not be a problem to start 5.0.4 so I'm curious why this isn't working in your Toon now. The message "Your Toon already tried downloading version 5.0.4 before. Need to force this version!" is a new feature which I added last week. If this is causing issue's I need to check why.
Re: Toon firmware - update script
Posted: Sat Feb 23, 2019 2:28 pm
by Markie13
TheHogNL wrote:
Can you post that 'vertical Y' logs? Don't understand where that is coming from.
Removing the download files doesn't help. As soon as the Toon has started a version download the OPKG package information is stored and can not simply be removed. It should not be a problem to start 5.0.4 so I'm curious why this isn't working in your Toon now. The message "Your Toon already tried downloading version 5.0.4 before. Need to force this version!" is a new feature which I added last week. If this is causing issue's I need to check why.
Hi TheHogNL,
After many attempts I finally upgraded my Toon 1 to 5.0.4. Thanks for the script.
You asked for a Y log. Can I still apply this after the upgrade?
Re: Toon firmware - update script
Posted: Sat Feb 23, 2019 3:10 pm
by TheHogNL
No it is ok now.
Re: Toon firmware - update script
Posted: Sat Feb 23, 2019 3:51 pm
by Markie13
TheHogNL wrote:No it is ok now.
Thanks to you all for your hard work/effort on Toon 1 and Toon 2.
Re: Toon firmware - update script
Posted: Fri Mar 01, 2019 8:39 pm
by stijnpeeters
I think i made the mistake of updating from 3.9 to 5.0.2 in 1 step.
script stopped somehow and toon is not booting.
Is there a way to "unbrick" it?