Fully automated rooting script

Everything about rooting Toon 1 (and 2, at some point).

Moderator: marcelr

Re: Fully automated rooting script

Postby martenjacobs » Tue Jun 26, 2018 7:53 am

Prutzer wrote:When is the new version with the option to disable the SSH key pair going to be released?


Perhaps at some time in the future, if I have time. However, a text password is now also enabled by default (thanks to IgorYbema). You should be able to use the randomly generated password that is shown during rooting to log in, without requiring the private key. If you want, you can remove the key that's in /root/.ssh/authorized_keys to disable public key access completely.
martenjacobs
Starting Member
Starting Member
 
Posts: 20
Joined: March 2018

Re: Fully automated rooting script

Postby hdok » Thu Jul 26, 2018 4:32 pm

Yesterday I rooted my 1000 year old :-) Toon with your software using a cable as you described... It worked like a charm. Just used toon store to add buienradar. Thanks for your great work!
hdok
Starting Member
Starting Member
 
Posts: 4
Joined: July 2018

Re: Fully automated rooting script

Postby mogwai » Fri Aug 10, 2018 9:46 pm

I succesfully rooted my Toon running SW version 4.16.8 using your toonrooter. Thanks!

I did have to modify "assets/raspberrypi.cfg" for my RasPI 1 B+. Maybe it's a good idea to include different versions of the config file for the different RasPI versions. According to the info I found (stackoverflow.com/questions/43612379/op ... 9#43777549), the configuration flavours are as mentioned below. I obviously used the settings for Raspi1 and that worked like a charm.

Code: Select all
# Raspi2 and Raspi3 peripheral_base address
bcm2835gpio_peripheral_base 0x3F000000

# Raspi1 peripheral_base address
bcm2835gpio_peripheral_base 0x20000000

# Raspi3 BCM2837 (1200Mhz):
bcm2835gpio_speed_coeffs 194938 48

# Raspi2 BCM2836 (900Mhz):
bcm2835gpio_speed_coeffs 146203 36

# Raspi1 BCM2835: (700Mhz)
bcm2835gpio_speed_coeffs 113714 28
mogwai
Starting Member
Starting Member
 
Posts: 5
Joined: August 2018

Re: Fully automated rooting script

Postby martenjacobs » Sat Aug 11, 2018 11:41 am

mogwai wrote:I succesfully rooted my Toon running SW version 4.16.8 using your toonrooter. Thanks!

I did have to modify "assets/raspberrypi.cfg" for my RasPI 1 B+. Maybe it's a good idea to include different versions of the config file for the different RasPI versions. According to the info I found (stackoverflow.com/questions/43612379/op ... 9#43777549), the configuration flavours are as mentioned below. I obviously used the settings for Raspi1 and that worked like a charm.


This is a good idea. It's even possible to autodetect the device version we're working on with the information here. I'm going to work on this now :D

EDIT: I've made some changes in a separate branch of the repo. I think everything should work as expected, but I did some refactoring to make life a little easier, which may have caused bugs. If anyone would be willing to do some tests, that would be very helpful.
martenjacobs
Starting Member
Starting Member
 
Posts: 20
Joined: March 2018

Previous

Return to Toon Rooting

Who is online

Users browsing this forum: No registered users and 0 guests