Fully automated rooting script

Everything about rooting Toons 1 and 2.

Moderators: marcelr, TheHogNL, TerrorSource, Toonz

Re: Fully automated rooting script

Postby whizzz63 » Sat Mar 09, 2019 9:09 am

TheHogNL wrote:
whizzz63 wrote:Just to check: Tx is on pin 13? (and is Rx on de USB to Serial converter)

What else can I check?

Correct. But are you pointing to the correct pin 13? And ofcourse are you sure you have the correct password in your copy/paste buffer?



Pin 1 is on the top left, Pin 2 on the top right, pin 3 under Pin 1 and so on?
whizzz63
Starting Member
Starting Member
 
Posts: 10
Joined: February 2019

Re: Fully automated rooting script

Postby TheHogNL » Sat Mar 09, 2019 9:20 am

Correct. So the pins you need are the last two on the bottom and the one row above on the left side.
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 896
Joined: August 2017

Re: Fully automated rooting script

Postby whizzz63 » Sat Mar 09, 2019 9:22 am

TheHogNL wrote:Correct. So the pins you need are the last two on the bottom and the one row above on the left side.


Seems everything is connected correctly, the password is correct (corresponding to the software version), but still...... keeps booting after pasting the password...... :cry:
whizzz63
Starting Member
Starting Member
 
Posts: 10
Joined: February 2019

Re: Fully automated rooting script

Postby TheHogNL » Sat Mar 09, 2019 9:29 am

Just to be sure, can you post a photo of your wires connected to the toon? And the boot screen where the boot version is shown?
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 896
Joined: August 2017

Re: Fully automated rooting script

Postby whizzz63 » Sat Mar 09, 2019 10:13 am

TheHogNL wrote:Just to be sure, can you post a photo of your wires connected to the toon? And the boot screen where the boot version is shown?
Attachments
Schermafbeelding 2019-03-09 om 10.01.53.png
Schermafbeelding 2019-03-09 om 10.01.53.png (54.88 KiB) Viewed 334 times
whizzz63
Starting Member
Starting Member
 
Posts: 10
Joined: February 2019

Re: Fully automated rooting script

Postby whizzz63 » Sat Mar 09, 2019 10:15 am

TheHogNL wrote:Just to be sure, can you post a photo of your wires connected to the toon? And the boot screen where the boot version is shown?
Attachments
Toon.png
Toon.png (215.29 KiB) Viewed 335 times
whizzz63
Starting Member
Starting Member
 
Posts: 10
Joined: February 2019

Re: Fully automated rooting script

Postby TheHogNL » Sat Mar 09, 2019 2:49 pm

You are connected to the correct pins. However, I was not expecting two extra wires. Most TTL adapters have 4 wires (tx, rx, gnd and 3.3v). What ttl adapter are you using and are you sure those are the tx and rx from the adapter?
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 896
Joined: August 2017

Re: Fully automated rooting script

Postby mAiden » Sat Mar 09, 2019 6:14 pm

It looks you have a PL2303, most of time this one is 5v
You need 3v3.

Try at you're own risk this one:

Black wire is GND, connect this one on GnD from Toon.
Green wire is TXD, connect this one on RxD from Toon.
White wire is RxD, connect this one on TxD from Toon.

Can you put the password now in?
mAiden
Member
Member
 
Posts: 167
Joined: July 2017

Re: Fully automated rooting script

Postby whizzz63 » Sat Mar 09, 2019 6:15 pm

TheHogNL wrote:You are connected to the correct pins. However, I was not expecting two extra wires. Most TTL adapters have 4 wires (tx, rx, gnd and 3.3v). What ttl adapter are you using and are you sure those are the tx and rx from the adapter?


It is a USB to TTL converter with a FTDI chipset.
6 wires:
1. Yellow: RTS
2. Black: GND
3. Blue: CTS
4. Green: TXD
5. Red: 5v
6. White: RXD
whizzz63
Starting Member
Starting Member
 
Posts: 10
Joined: February 2019

Re: Fully automated rooting script

Postby whizzz63 » Sat Mar 09, 2019 6:20 pm

mAiden wrote:It looks you have a PL2303, most of time this one is 5v
You need 3v3.

Try at you're own risk this one:

Black wire is GND, connect this one on GnD from Toon.
Green wire is TXD, connect this one on RxD from Toon.
White wire is RxD, connect this one on TxD from Toon.

Can you put the password now in?



No, unfortunately, I can't put the password in.....
whizzz63
Starting Member
Starting Member
 
Posts: 10
Joined: February 2019

Re: Fully automated rooting script

Postby TheHogNL » Sun Mar 10, 2019 8:27 am

Where did you buy this? Are you sure it is 3.3v (as the red power is putting 5v my guess is that your TX is also on 5V)?
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 896
Joined: August 2017

Re: Fully automated rooting script

Postby whizzz63 » Sun Mar 10, 2019 2:40 pm

TheHogNL wrote:Where did you buy this? Are you sure it is 3.3v (as the red power is putting 5v my guess is that your TX is also on 5V)?


This one is from AliExpress.
Wich one do you suggest?
whizzz63
Starting Member
Starting Member
 
Posts: 10
Joined: February 2019

Re: Fully automated rooting script

Postby TheHogNL » Sun Mar 10, 2019 2:58 pm

By the way, you are posting this in the automated rooting script topic... you are using the manual way. :-) My guess is that your cable is wrong, or now with 5v you might have broken the UART on the toon (requering 3.3v).
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 896
Joined: August 2017

Re: Fully automated rooting script

Postby paul89 » Mon Mar 18, 2019 11:58 am

Rooted my Toon a couple of weeks ago and just wanted to say the automated script is awesome.
I only had some issues with installing OpenOCD on the Raspberry Pi though, I ended up installing it the way described here, after that, it worked as a charm!
paul89
Starting Member
Starting Member
 
Posts: 2
Joined: March 2019

Re: Fully automated rooting script

Postby Plumifrons » Thu Mar 21, 2019 10:50 am

What is 'best practice' for using the rooting script?

Should I reset my toon to factory settings before rooting or afterwards? Do I need to setup wifi before using the script (i guess not...)

Do I loose the activation by resetting it, or is that fixed again by using the stript?
Plumifrons
Starting Member
Starting Member
 
Posts: 2
Joined: March 2019

PreviousNext

Return to Toon Rooting

Who is online

Users browsing this forum: No registered users and 0 guests

cron