New major firmware release 5.0.4 - UPGRADE AVAILABLE

[madpatrick]

update was succesfull.
Only the custom app where removed from the tiles.
added them again and working !

thanks !!

[Ierlandfan]

@TheHogNL

Do you need a toon1 or toon2 drawables?

For a 1.

I noticed the update script thought I was on a Toon 2 (Only saw that when the upgrade failed) for some reason so I think that's why the file is not working.

[TheHogNL]

Ok just put the 5.0.4 toon1 drawables-base.rcc here for you: http://qutility.nl/resourcefiles/drawab ... s-base.rcc

[Ierlandfan]

Thanx! Still not working but I noticed in the QT logs this:


(A lot of those Failed to get image from provider) This is just an example.

qrc:/qb/components/ThreeStateButton.qml:52:2: QML Image: Failed to get image from provider: image://colorized/#a8a8a8/images/arrow-down.svg

Any idea?

[TheHogNL]

Hmms looks like your QT is not updated correctly or something. This image://colorized is new in fw 5. Try to reinstall the qt-gui package with "opkg install --force-reinstall qt-gui" with VPN connected (remember if you manually enable the VPN you will loose the scsync settings).

[Ierlandfan]

With the resource files replaced and a reinstall of qt it works like it should.
Thanx!

[witteherder]

I m NEWBIE so I have no experience at all (for now)
Can I upgrade m toon version 4.22.7 to 5.04 from the Toon1 Panel without any problem or should I wait untill bugs are away?

Because if something goes wrong I don't know how to fix...

[TheHogNL]

Just wait. There is really nothing in 5.0.4 which you need to have (yes, booting is a bit quicker but that is all).

[hdok]

Just installed 5.0.4 on my toon1. It solved the afvalwijzer problem I had. Installation went smoothly, like stated earlier, I had to re-add all custom tiles and had to switch off some native toon apps. It appears to work as expected. Again: great work you guys! Thanks!

[mogwai]

I finally dared to upgrade my toon1 to 5.0.4 using the update script. It worked flawlessly. Thanks for the hard work guys!

[yjb]

Finally had to courage to upgrade my Toon2 to 5.0.4: works like a charm. Thanks for all the work!

[NLKris]

I did the upgrade from 4.22.x > 5.0.4. Works all fine first, untill I start to test if the auto boot of X11vnc would work. I add the follow line in the inittab:

$ x11v:5:respawn:/usr/bin/x11vnc

In 4.22.x it didn't do anything for me. With 5.0.4 it booted up after a reboot. So for the first time it booted, but I saw that it started for 10 times on 10 different ports (5900 till 5909). After some testing I found out the toon resets after a while and stay in boot loop. If I power op it will run normal, after some minutes the Toon goes back in bootloop. Remove line and problem solved. Is there any other way to boot it fine? I saw someone else had this problem but didn't post the workaround.

Also I'm looking for a way to get dimmode when the program "Weg" and/or "Slapen" is active. I wan't alway the dimstate, someone that know how to edit that?

Thanks.

[TheHogNL]

don't put x11vnc in inittab.. only start x11vnc if you need it. It eats a lot of memory so having it running while you are not using it is just a waste of resources.
But if you really want it to auto start, create a script int /etc/init.d and link from it from /etc/rc5.d

[NLKris]

Ahh oke, thats clear. Any tips for the dimstate thing? I don't want the screen to go black while sleeping or away is set.

[TheHogNL]

That is not possible with the software now as far as I know