Page 1 of 1
saix programming
Posted: Fri Jul 11, 2008 8:40 pm
by Ruud
After i failed to program a saix it never stops blinking.
How do i reset the saix or is this normal, i have three saix with this problem .
grtz Ruud
saix programming
Posted: Fri Jul 11, 2008 8:59 pm
by Peterpc
blinking is normal.
steady led is program mode
saix programming
Posted: Fri Jul 11, 2008 10:25 pm
by Ruud
Thanks i bought secondhand.
And thought for a Little moment that their ware broke
saix programming
Posted: Fri Aug 01, 2008 10:14 pm
by dwang
I have a CTX35 and want to program a SAIX12.
I only can program the adres, but the special codes doesn't work.
Like the ON status and ALN, ALF etc. won't work the modul doesn't react.
Only when I put a A for the command then the modul reacts with the blinking (3 , 4 times)
When I go out the program status the modul only react with the command AON and not on the command A01A01 ONON.
In the testprogram the modul reacts on the A01 test button.
And not with the A02 stand, so the adres is good.
Does anyone nows what I doing wrong.
Sorry for the bad english Mindbender.[;)]
saix programming
Posted: Fri Aug 01, 2008 10:22 pm
by MindBender
First of all: English please! Posting replies on an English topic in another language shows bad manners.
Second: I don't know the difference yet and likely neither does anybody else here because my earlier question on this topic is still without reply:
http://www.domoticaforum.eu/topic.asp?TOPIC_ID=1217