Hardware requirement

Everything about rooting Toons 1 and 2.

Moderators: marcelr, TheHogNL, TerrorSource, Toonz

Hardware requirement

Postby adval40 » Fri May 17, 2019 10:51 pm

I want to root my new toon (Toon 1)

What do I need ?
* Raspberry Pi
* USB to ttl 3.3v converter

Do I need a JTAG controller ?

thanks in advance

adval40
adval40
Starting Member
Starting Member
 
Posts: 3
Joined: September 2017

Re: Hardware requirement

Postby TheHogNL » Sat May 18, 2019 6:56 am

If your Toon is old enough (with known boot password) then a * USB to ttl 3.3v converter * wil be enough (with a computer ofcourse).

If your Toon is newer (with unknown password) you need the * Rasberry PI * with a few female-female dupont cables. You won't need the USB converter anymore as the Pi has an onboard 3.3v serial port.

A JTAG controller isn't needed. The PI is doing the JTAG debugging in software for you.

=============

So best, without knowing you have an older or newer Toon 1, is just to buy a Pi and some of those dupont cables

And next time, just read the manual in https://www.domoticaforum.eu/viewtopic. ... 235#p82533
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 960
Joined: August 2017

Re: Hardware requirement

Postby adval40 » Sat May 18, 2019 3:01 pm

how can I see if I have an old one

my SN start with 12-39-005-xxx

thanks for quick reply
adval40
Starting Member
Starting Member
 
Posts: 3
Joined: September 2017

Re: Hardware requirement

Postby TheHogNL » Sat May 18, 2019 3:04 pm

SN 12 is an older one. Probably with known password. But never sure about this.
Beste way is to go with the Raspberry Pi option. It is so easy to do it with that rooter script. And you own a Raspberry PI afterwards which you then can use to do your home automation on :-)
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 960
Joined: August 2017

Re: Hardware requirement

Postby adval40 » Sat May 18, 2019 3:10 pm

I saw later started with 16 has unknown password

Now i can started

when it works I write it here

adval40
adval40
Starting Member
Starting Member
 
Posts: 3
Joined: September 2017

Re: Hardware requirement

Postby Hussar_303 » Sun May 19, 2019 6:33 pm

TheHogNL wrote:
If your Toon is newer (with unknown password) you need the * Rasberry PI * with a few female-female dupont cables. You won't need the USB converter anymore as the Pi has an onboard 3.3v serial port.



That's what I'm running Domotica on, and it does work fine; I had to do research on which cables I should use (looking back at it, I clearly didn't have enough technical knowledge to start this home automation project... but I still went in and manage to do stuff, so I keep going, even if I'm walking like a person in the dark and finding my way by bumping into walls :lol: )
Hussar_303
Starting Member
Starting Member
 
Posts: 3
Joined: April 2019


Return to Toon Rooting

Who is online

Users browsing this forum: No registered users and 1 guest