Home Automation Domotica Forum Europe, Bwired Forum

Posted: **Wed Apr 01, 2020 10:25 am**

Hello,

I have domoticz now for several years and i have recently troubles with the otgw.
After the update "2020.1" and restarting the otgw the next logfile comes.

Code: Select all

2020-04-01 10:02:11.174 Status: OTGW: T90013800
2020-04-01 10:02:11.297 Status: OTGW: B50013800
2020-04-01 10:02:11.713 Status: OTGW: T00110000
2020-04-01 10:02:11.896 Status: OTGW: B40110100
2020-04-01 10:02:12.252 Status: OTGW: T00050000
2020-04-01 10:02:12.395 Status: OTGW: BC00500FF
2020-04-01 10:02:12.792 Status: OTGW: T00120000
2020-04-01 10:02:12.895 Status: OTGW: BC0120140
2020-04-01 10:02:13.331 Status: OTGW: T801A0000
2020-04-01 10:02:13.494 Status: OTGW: B401A2499

So i can see there is communication between the boiler and thermostat but i want to have them as devices in domoticz.
It worked before.
But nothing in shows up with the devices.
Can anyone help me?

Posted: **Wed Apr 15, 2020 8:43 am**

Look like you need to send the PS=0 command to the otgw as domoticz send PS=1 and does not set it back.

I also have the otgw running with domoticz 2020.1 and still get the complete log file.
This is due to running a script that monitors the PS status and set it back to 0 a couple of seconds later.
This script had to run with previous versions of domoticz as well.

Home Automation Domotica Forum Europe, Bwired Forum

Otgw and domoticz

Otgw and domoticz

Re: Otgw and domoticz