Page 2 of 3
Re: Toon as Domotica screen
Posted: Tue Sep 29, 2020 11:06 am
by TheHogNL
Never just copy a scsync file from another toon. That just doesn't work that way.
Best option it to go 'factory reset' your toon. When selection country press the globe 5 times. This will show another 'country', Quby Toon (or something like that). If you choose that you have all the options available in the next wizard where you config the toon (like smart radiator valves and the no heating support).
Factory reset will not break your root access.
Re: Toon as Domotica screen
Posted: Tue Sep 29, 2020 11:58 am
by Xavier
TheHogNL wrote:Never just copy a scsync file from another toon. That just doesn't work that way.
Best option it to go 'factory reset' your toon. When selection country press the globe 5 times. This will show another 'country', Quby Toon (or something like that). If you choose that you have all the options available in the next wizard where you config the toon (like smart radiator valves and the no heating support).
Factory reset will not break your root access.
Ok so I just did the factory reset, pressed the Globe 5 times and choose "Quby Toon".
Toon rebooted and installed again, but nowhere the option to disable the thermostat module...
The config_happ_scsync.xml file is now:
Code: Select all
<Config packageRevision="455">
<sysConfig>
<locale>nl_NL</locale>
<timezone>Europe/Amsterdam</timezone>
<currency>EUR</currency></sysConfig>
<device>
<package>happ_scsync</package>
<uuid>REMOVED</uuid>
<type>agreementDetail</type>
<internalAddress>agreementDetail</internalAddress>
<visibility>0</visibility><StartDate>0</StartDate><EndDate>-1</EndDate><ProductVariant>Toon</ProductVariant><activated>1</activated><wizardDone>1</wizardDone><ElectricityDisplay>0</ElectricityDisplay><GasDisplay>0</GasDisplay><HeatDisplay>0</HeatDisplay><SolarDisplay>0</SolarDisplay><SolarActivated>0</SolarActivated><OtherProviderElec>0</OtherProviderElec><OtherProviderGas>0</OtherProviderGas><SME>0</SME><HeatWinner>0</HeatWinner><mobileAccess>1</mobileAccess><supportEnabled>0</supportEnabled><supportEnabledStart>0</supportEnabledStart><researchEnabled>0</researchEnabled><doSolarWhatsnew>0</doSolarWhatsnew><latestWhatsnewVersion>qt-gui - 1.9799-1-g7f14c-cth-2111-change-factory-</latestWhatsnewVersion><statusUsageFirstUse>0</statusUsageFirstUse><scStatusFlags>0</scStatusFlags><commissionState>1</commissionState><features></features><featureInputs></featureInputs></device>
<device>
<serial_number>REMOVED</serial_number>
<device_type>Display</device_type>
<device_model>6500-1200-4901</device_model>
<hardware_version>6500-1200-4901</hardware_version>
<manufacturer>Prodrive</manufacturer>
<devicePackage>hcb_config</devicePackage>
<package>happ_scsync</package>
<uuid>REMOVED</uuid>
<type>deviceInfo</type>
<name>deviceInfo</name>
<internalAddress>hcb_config</internalAddress>
<visibility>1</visibility></device>
<device>
<serial_number>REMOVED</serial_number>
<device_type>BoilerAdapter</device_type>
<device_model>6599-1500-0300</device_model>
<hardware_version>6599-1500-0300</hardware_version>
<manufacturer>Prodrive</manufacturer>
<devicePackage>happ_thermstat</devicePackage>
<package>happ_scsync</package>
<uuid>REMOVED</uuid>
<type>deviceInfo</type>
<name>deviceInfo</name>
<internalAddress>16-14-010-165</internalAddress>
<visibility>1</visibility></device></Config>
Re: Toon as Domotica screen
Posted: Tue Sep 29, 2020 12:04 pm
by TheHogNL
Xavier wrote:TheHogNL wrote:Never just copy a scsync file from another toon. That just doesn't work that way.
Best option it to go 'factory reset' your toon. When selection country press the globe 5 times. This will show another 'country', Quby Toon (or something like that). If you choose that you have all the options available in the next wizard where you config the toon (like smart radiator valves and the no heating support).
Factory reset will not break your root access.
Ok so I just did the factory reset, pressed the Globe 5 times and choose "Quby Toon".
Toon rebooted and installed again, but nowhere the option to disable the thermostat module...
After choosing quby toon, didn't you see the new toon config wizard? Try the factory reset again, it should show that wizard. Maybe select 'remove my connected module' also while choosing factory reset.
Re: Toon as Domotica screen
Posted: Tue Sep 29, 2020 12:08 pm
by Xavier
TheHogNL wrote:Xavier wrote:TheHogNL wrote:Never just copy a scsync file from another toon. That just doesn't work that way.
Best option it to go 'factory reset' your toon. When selection country press the globe 5 times. This will show another 'country', Quby Toon (or something like that). If you choose that you have all the options available in the next wizard where you config the toon (like smart radiator valves and the no heating support).
Factory reset will not break your root access.
Ok so I just did the factory reset, pressed the Globe 5 times and choose "Quby Toon".
Toon rebooted and installed again, but nowhere the option to disable the thermostat module...
After choosing quby toon, didn't you see the new toon config wizard? Try the factory reset again, it should show that wizard. Maybe select 'remove my connected module' also while choosing factory reset.
ahh I think we talk past each other (langs elkaar praten), I tought the factory reset was necessary to remove the thermostat module and you are talking about how to remove connected modules
I managed to remove/disconnect the module.
But for now I just want to remove the thermostat module on the mainscreen of Toon so that temparature can't be managed.
So the "<feature>noHeating</feature>" feature
Re: Toon as Domotica screen
Posted: Tue Sep 29, 2020 12:19 pm
by TheHogNL
Xavier wrote:TheHogNL wrote:Xavier wrote:
After choosing quby toon, didn't you see the new toon config wizard? Try the factory reset again, it should show that wizard. Maybe select 'remove my connected module' also while choosing factory reset.
ahh I think we talk past each other (langs elkaar praten), I tought the factory reset was necessary to remove the thermostat module and you are talking about how to remove connected modules
I managed to remove/disconnect the module.
But for now I just want to remove the thermostat module on the mainscreen of Toon so that temparature can't be managed.
So the "<feature>noHeating</feature>" feature
No that is exactly what I mean
using the factory reset is the normal way to get the noHeating feature.
Re: Toon as Domotica screen
Posted: Tue Sep 29, 2020 12:23 pm
by Xavier
ah in that case it didn't work
But uhmmm in the case of factory reset, I now have the Toon connected thru the Thermostat module for power supply, do I only need to connect the power without the thermostat module in that case?
Ok, that did the trick, I removed the thermostat module and attached the power supply directly to Toon.
The thermostat module on Toon is now gone and I can see 6 tiles.
Thanks for all the support!
Re: Toon as Domotica screen
Posted: Tue Sep 29, 2020 1:33 pm
by TheHogNL
Xavier wrote:ah in that case it didn't work
But uhmmm in the case of factory reset, I now have the Toon connected thru the Thermostat module for power supply, do I only need to connect the power without the thermostat module in that case?
Ok, that did the trick, I removed the thermostat module and attached the power supply directly to Toon.
The thermostat module on Toon is now gone and I can see 6 tiles.
Thanks for all the support!
Ok. With the module still connected it should work also .. but ok you
Re: Toon as Domotica screen
Posted: Thu Oct 08, 2020 4:08 pm
by Arcidodo
is it possible to dimm/active the screen remotely? like you set the toon on sleep or home mode?
Re: Toon as Domotica screen
Posted: Thu Oct 15, 2020 9:18 am
by Arcidodo
I created a simple app do do it for me, and used the function "screenStateController" and now i can control it using HomeAssistant.
app:
https://github.com/arcidodo/ScreenState
Code: Select all
screenStateController.forceTestScreenState("3"); // Screen ON *black/white mode
screenStateController.forceTestScreenState("4"); // Screen OFF
Re: Toon as Domotica screen
Posted: Thu Feb 04, 2021 4:04 pm
by bosf
My config_happ_scsync.xml did not contain a '<features> .. </features> section. After turning off 'Zon op Toon', reboot, and turning it on again, this line was there at the very bottom of the file. Then I inserted the <feature>noHeating</feature>. Saved the file. After reboot (shutdown -r now) the heating part was gone.
It looks very nice. There are now 6 tiles on the display.
Now i use the Toon as a display for energy consumption and output of my solar panels with the 'Solar Panel' app.
Re: Toon as Domotica screen
Posted: Fri May 13, 2022 10:30 am
by Xavier
So picking up an old item.
I would like to restore the thermostat feature.
No in the /qmf/config/config_happ_scync.xml I have feature noheating.
If I want it back, should it say <feature>heating</feature> or do I remove the entire "line"/ Feature?
And second...is this the same on Toon2 to disbale thermostat feature with noHeating? Also in config_happ_scync.xml?
Re: Toon as Domotica screen
Posted: Fri May 13, 2022 6:33 pm
by oepi-loepi
Remove <feature> and </feature> as well. Fot toon 2 it is the same.
Re: Toon as Domotica screen
Posted: Mon May 16, 2022 11:49 am
by Xavier
I tried on Toon2 to adjust the file /qmf/config/config_happ_scsync.xml.
This is what I have:
Code: Select all
<Config packageRevision="253">
<sysConfig>
<locale>nl_BE</locale>
<timezone>Europe/Amsterdam</timezone>
<currency>EUR</currency></sysConfig>
<device>
<package>happ_scsync</package>
<uuid>HIDDEN</uuid>
<type>agreementDetail</type>
<internalAddress>agreementDetail</internalAddress>
<visibility>0</visibility><StartDate>0</StartDate><EndDate>-1</EndDate><ProductVariant>Toon</ProductVariant><activated>1</activated><wizardDone>1</wizardDone><SoftwareUpdates>1</SoftwareUpdates><BoilerManagement activated="0">0</BoilerManagement><ElectricityDisplay>1</ElectricityDisplay><GasDisplay>1</GasDisplay><HeatDisplay>0</HeatDisplay><SolarDisplay>0</SolarDisplay><SolarActivated>0</SolarActivated><OtherProviderElec>0</OtherProviderElec><OtherProviderGas>0</OtherProviderGas><SME>0</SME><HeatWinner>0</HeatWinner><ContentApps>0</ContentApps><TelmiEnabled>0</TelmiEnabled><mobileAccess>1</mobileAccess><supportEnabled>1</supportEnabled><supportEnabledStart>HIDDEN</supportEnabledStart><researchEnabled>0</researchEnabled><doSolarWhatsnew>0</doSolarWhatsnew><latestWhatsnewVersion>qt-gui - 1.9873-master</latestWhatsnewVersion><statusUsageFirstUse>0</statusUsageFirstUse><scStatusFlags>4</scStatusFlags><commissionState>4</commissionState><features><feature>noHeating</feature></features></device>
<device>
<serial_number>HIDDEN</serial_number>
<device_type>Display</device_type>
<device_model>HIDDEN</device_model>
<hardware_version>HIDDEN</hardware_version>
<manufacturer>Prodrive</manufacturer>
<sw_version>nxt/ene/4.9.124</sw_version>
<devicePackage>hcb_config</devicePackage>
<package>happ_scsync</package>
<uuid>HIDDEN</uuid>
<type>deviceInfo</type>
<name>deviceInfo</name>
<internalAddress>hcb_config</internalAddress>
<visibility>1</visibility></device>
<device>
<serial_number>HIDDEN</serial_number>
<device_type>BoilerAdapter</device_type>
<device_model>HIDDEN</device_model>
<hardware_version>HIDDEN</hardware_version>
<manufacturer>Prodrive</manufacturer>
<sw_version>37</sw_version>
<devicePackage>happ_thermstat</devicePackage>
<package>happ_scsync</package>
<uuid>HIDDEN</uuid>
<type>deviceInfo</type>
<name>deviceInfo</name>
<internalAddress>HIDDEN</internalAddress>
<visibility>1</visibility></device></Config>
Adding <features> and </features> did the trick.
Entire code is:
Code: Select all
<features><feature>noHeating</feature></features
After that power cycle Toon2.
Thermostat should be gone now.
Re: Toon as Domotica screen
Posted: Mon May 16, 2022 1:54 pm
by oepi-loepi
Is still see the noheating feature in the code you have send (at the end of the long line). Remove, save and reboot.
Re: Toon as Domotica screen
Posted: Mon May 16, 2022 1:59 pm
by Xavier
@oepie-loepi, that was to enable heating feature on old toon1.
I have a new second Toon2, and there I want to disable the heating feature.
But now I succceeded, adding ",features></features>" makes it work.