Page 1 of 1
Water and Heat measurement
Posted: Tue Jul 29, 2008 10:21 pm
by TANE
Hi All,
I like to measure water and heat (stadsverwarming)
What do I need for this
see the pictures.
I have Rfxmeter(power only)
[img]uploaded/Chak/2008729221938_DSC02314.JPG[/img]
[img]uploaded/Chak/2008729222037_DSC02312.JPG[/img]
Water and Heat measurement
Posted: Tue Jul 29, 2008 10:31 pm
by b_weijenberg
For the water meter you can use the RFXPulse with a reflective-optical sensor. This sensor can be placed above the wheel that is half metal, half red plastics.
Check if there is any usable pulse on the energy meter.
http://www.metersdirect.co.uk/PDFs/F2manual.PDF
Water and Heat measurement
Posted: Tue Jul 29, 2008 11:16 pm
by TANE
Bert,
Thanks for the attachment.
there is a flashing lcd block at the left corner. (page 6)
First i need to understand how and what they measure.
For the water part this are the modules?
RFXPulse module Order code: 70090
Reflective-Optical sensor Order code: 70091
Water and Heat measurement
Posted: Tue Jul 29, 2008 11:18 pm
by b_weijenberg
The order numbers are correct.
Water and Heat measurement
Posted: Wed Jul 30, 2008 9:18 am
by MindBender
The energy meter seems to have an infra-red interface at the front. It would be nice to know a little about the protocol.
For the half-metal wheel you could use a hall-sensor as well, though I don't think those are standard RFX probes.
Water and Heat measurement
Posted: Wed Jul 30, 2008 9:28 am
by TANE
Yes there is a IR sensor in front..i think for automatic reading the correct settings from the display.
I'm going to start with water..hope in the next months there are other forum users with the same energy meter.
first step is reading..next step developing the Homeseer logging /charts.