Home Automation Domotica Forum Europe, Bwired Forum

I bought a Pioneer plasma screen today and noticed that if the TV is turned the wireless control of my X10 devices dont work anymore. I have a V572RF32AF wireless receiver with an XM10 interace and a SH624 remote control. If I turn the TV off it instantly works again. It is a wireless problem because X10 commands over powerline have no problem.

Anybody any idea what this could be? Or better, how to solve it?

Did you try to put the receiver in a different place

i have seen that a plasma uses a high power factor.
i mean, it uses for EXAMPLE 60w but put 50w back to the power line. Maybe that this cause a problem over the power line?

What do you mean with "put 50w back to the power line" I have never seen Power User which gives back some power.

I think the problem of TOZZ is the radio radiation from the plasma screen disturbs the communication between the wireless receiver and the remote control. Try what Bwired says but the receiver must not be to close to your plasma.

When it is good, try to make it better, use it only when it is best!!

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by wimmer</i>
<br />What do you mean with "put 50w back to the power line" I have never seen Power User which gives back some power.<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">check http://en.wikipedia.org/wiki/Power_factor and other sites.. also known as cos phi