Home Automation Domotica Forum Europe, Bwired Forum

Posted: **Thu Nov 23, 2023 4:22 pm**

Today i upgraded the firmware of the nodeMCU (wifi) that is on my OTGW. I think my nodeMCU is off an older type (with ESP8266).
I used firmware ESP_Easy_mega_20231013_normal_ESP8266_4M1M
The previous firmware was 5 years old (2018).

I can acces the webpage of the nodeMCU.

What are the correct settings at the "Devices" tab for the Serial server?

: Devices_tab.jpg (36.13 KiB) Viewed 1772 times

: devices_tab_opentherm.jpg (87.77 KiB) Viewed 1772 times

Anything else i can check to get it working and communicating back to Domoticz?

Domoticz is showing

2023-11-23 15:23:07.954 Status: OTGW: connected to: 192.168.0.220:6638

But in fact the OTGW "sensors" are not updated.

Posted: **Sun Nov 26, 2023 10:47 pm**

Hi, can you try this? Especially your serial settings seems not OK.
I recently stepped over from v147 (!) to mega-20230507.
For me it.s OK.
Also tried the new MQTT softwaren from NoDo shop but to much errors for me and missing the setpoint overrule option.
Succes!
-Bart

Home Automation Domotica Forum Europe, Bwired Forum

Upgraded ESP Easy, Domoticz cannot connect to OTGW anymore

Upgraded ESP Easy, Domoticz cannot connect to OTGW anymore

Re: Upgraded ESP Easy, Domoticz cannot connect to OTGW anymore