Noddie starter question.
Posted: Tue Jan 21, 2025 7:57 pm
Hi all,
Reading and googling I might be well out of my depth on this venture but here goes.
I have ordered an Ideal opentherm thermostat for my Ideal Vogue Max system boiler and would like ultimately to use Smart Autotune Thermostat (SAT) on Home Assistant for control.
My confusion is which opentherm gateway do I need to get from nodo-shop, SAT accepts MQTT and the Wi-Fi version would work but I also need OT Monitor to read the opentherm data but I don’t see an option to get the data into the monitor software from the Wi-Fi version as I understand it.
If I get the LAN version of the gateway, this would allow the OT monitor to work but I’m not sure if SAT would.
Any help or guidance appreciated.
Ian
Reading and googling I might be well out of my depth on this venture but here goes.
I have ordered an Ideal opentherm thermostat for my Ideal Vogue Max system boiler and would like ultimately to use Smart Autotune Thermostat (SAT) on Home Assistant for control.
My confusion is which opentherm gateway do I need to get from nodo-shop, SAT accepts MQTT and the Wi-Fi version would work but I also need OT Monitor to read the opentherm data but I don’t see an option to get the data into the monitor software from the Wi-Fi version as I understand it.
If I get the LAN version of the gateway, this would allow the OT monitor to work but I’m not sure if SAT would.
Any help or guidance appreciated.
Ian