Page 4 of 4
Intel ATOM 330 Dual Core 1.6 Mini-PC
Posted: Fri Jan 02, 2009 1:13 pm
by Bwired
@wifi: Bwired is black
At Lempens: I have replaced the fan with a silent low rpm SilenX 4x4x1cm 3200rpm fan
And added 1 extra fan for the 10.000rpm Western Digital Raptor HD, I will replace this HD with a SSD drive, but need a very fast one!
Check my blog also
http://www.bwired.nl/weblog.asp?id=281
Intel ATOM 330 Dual Core 1.6 Mini-PC
Posted: Fri Jan 02, 2009 1:21 pm
by Alexander
Pieter,
IIS7 with Win2k3?
Intel ATOM 330 Dual Core 1.6 Mini-PC
Posted: Fri Jan 02, 2009 2:54 pm
by Bwired
You are right IIS6 and IE7
Intel ATOM 330 Dual Core 1.6 Mini-PC
Posted: Thu Jan 15, 2009 8:16 pm
by Juande
Pieter,
I have finally mounted a new one server for HA with tha same HW than you.
It performs quite well with a lot of running applications.
The noise from the CPU fan is however an issue, comparing with my old HS HW with silent vents.
I have searched for silent vents on 40x40x10 mm and found some inteesting options. The question is, 4cm is still to big to replace the CPU fan which is even smaller. Could you give me some indications (or even better pictures) on how you replaced and fixed the fan to the CPU disipator?
Thanks a lot!
Juan
Intel ATOM 330 Dual Core 1.6 Mini-PC
Posted: Thu Jan 15, 2009 11:33 pm
by Bwired
I had the same problem, replaced the fan with a SilenX iXtrema PRO IXP-11-14 - 40 x 40 x 10 mm.
14dBa and 3500rpm
http://shop.freezinghardware.nl/index.a ... i=5142&c=0
Intel ATOM 330 Dual Core 1.6 Mini-PC
Posted: Fri Jan 16, 2009 12:34 am
by Juande
Ok, but how did you mounted on the dissipatator? holes for screws don't match because original fan is smaller than your silenX
thanks
Juan
Intel ATOM 330 Dual Core 1.6 Mini-PC
Posted: Fri Jan 16, 2009 1:26 am
by Bwired
No fits perfectly, exact same size!