Home Automation Domotica Forum Europe, Bwired Forum

rfxcom doesnt see the kaku doorbel in homeseer.
i did cleared heard sensors and then tried to add new, but nothing to see after i pushed the button.
in homeseer log shows:19-10-2008 13:25:36 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:36 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F7887
and in rfreciever it shows the doorbel too.another way to add the doorbell?

The doorbel transmits an X10 code. As you have set the house code to "B" it is received as B8.

Enable the X10 receiving of house code B (status only)

Create an X10 device B8

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by b_weijenberg</i>
<br />The doorbel transmits an X10 code. As you have set the house code to "B" it is received as B8.

Enable the X10 receiving of house code B (status only)

Create an X10 device B8

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">that`s it! thank u verry much![:)]