Home Automation Domotica Forum Europe, Bwired Forum

Hallo all,

I'm ussing a CTX35 for a month now, it worked fine.
But the leds are stopped blinking and it doesn't recieve any commands any more!!
I still can sent a command from homeseer that still work's, but the CTX35 doesn't sent commands from the power-net to homeseer.

When I restart homeseer and sent 1 on/off command the CTX start working again but only for a short time.

I have installed the latest driver 2.0.0.2 ACT TI103, and but the bitrate of the com port on 19.200 bits.

Who knows what the problem maybe or is the CTX35 broken?

Regards Paul.

Other option is that you PC interface is not working fine.
best is to check this on a second PC

Hello Chak,

I have thought about that but the strange thing is that when the led's doesn't blink, I can control a unit on and off with homeseer.

Regards Paul.

Did you try it out for example with hyperterminal

i would try out chak's idea, with another pc if possible. dont know how far off your devices are from the ctx35, meaning that "sending" to it is possible by reach, but that the device on the other side is too far away. (i think you know what i mean)

anyway make sure you have the device close near your power distribution of the ctx35, just to be sure.

// Erik (binkey.nl)

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Bwired</i>
<br />Did you try it out for example with hyperterminal

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by snelvuur</i>
<br />i would try out chak's idea, with another pc if possible. dont know how far off your devices are from the ctx35, meaning that "sending" to it is possible by reach, but that the device on the other side is too far away. (i think you know what i mean)

anyway make sure you have the device close near your power distribution of the ctx35, just to be sure.

// Erik (binkey.nl)
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">Hello Erik,

My TM13 is in the same power plug as teh ctx35, so it must be close enough.
And leds has to blinck all the time even when there are no X10 command's to recieve if I'm sure.
And I have no other PC to test the ctx35 on.

Regards Paul.

Hyperterminal is a terminal program which you can use to connect directly to the interface using a serial connection. It's a standard Windows program.
Com5 is not a problem, you can select all the com-ports on your system in hyperterminal.
This product documentation lists some direct commands you can issue:
http://www.bwired.nl/images/how/ctx35.pdf

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Paul H te O</i>
<br /><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Bwired</i>
<br />Did you try it out for example with hyperterminal

Thanks Maarten!
The comports are no problem, I have like 13 comports available all my software is working on those ports.
But check your driver which comports it supports, for defect testing it's best to put it on 1.
With hyperterminal you can send some textcommands to the CTX35 for example "$>2800008C#"
And yes the CTX35 is not event driven, it needs to be polled for data so the led should blink depending on polling frequency.

Hello All,

I found out that there is a new driver version for the profilic usb to serial adapter, I have installed the new driver.
The results will I post as soon as de CTX35 stay's working fine.

THNX for all the help so far.

Regards Paul.

UPDATE: the new driver had no result I'm cone try another PC.

UPDATE2: the CTX35 is oke, what results in the next question what is the best way to connect the CTX35 to a vista PC whitout a serial port.
How do you ALL do this????????????

Hi, like in other post, i use a serial server . My ctx35 is connected to serial server trough rs232 and serial server is connected to hub-lan.
software of serial server will create a logical com port in every pc that is connected to the lan.

Paul,
A Serial to LAN converter makes you very flexible. Every device (a CTX35 for example) is addressable with an IP address. You should really consider this option.

Hello Digit, I have ordered the EZL-200F I hope it wil solve the problems.

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Digit</i>
<br />Paul,
A Serial to LAN converter makes you very flexible. Every device (a CTX35 for example) is addressable with an IP address. You should really consider this option.

Paul,

Wait, wait... you're going to use to CTX35 in combination with Homeseer, right?
So you did make sure the device server you bought has software that will create a Virtual Com Port on the PC?
Cause Homeseer cannot talk to a CTX35 by TCP/IP, or does it?
IIRC the EZL-200F doesn't come with software that creates a VCP, while others like the Lavalink (http://www.lavalink.com/index.php?id=257) do!

Right Robert, He needs to use the virtual comport and can't address directly to IP