Page 1 of 1
Powermax help
Posted: Thu Apr 09, 2009 9:28 pm
by paulh
I have an old Powermax alarm system (433Mhz) and the panel has stopped working. Does anyone know where I could obtain a replacement (cannot find one in the uk) or alternatively is there another system I could use that would still allow me to use all my existing PIRs/ detectors?
Thanks,
Paul
Powermax help
Posted: Thu Apr 09, 2009 9:59 pm
by Lennart
Powermax help
Posted: Fri Apr 10, 2009 8:25 am
by paulh
Lennart,
It looks different from the panel that I have but I assume that so long as it is a 433 system then it should work.
Many thanks,
Paul
Powermax help
Posted: Fri Apr 10, 2009 8:30 am
by Lennart
Hi Paul,
Have a look at
http://www.waakzaamwonen.nl/catalog/ind ... toebehoren to see if your sensors are on this page. If so, I guess it's safe to try.
Lennart
Powermax help
Posted: Fri Apr 10, 2009 8:54 am
by paulh
They seem to be all 868Mhz systems so maybe it won't work. I've emailed them to ask.
Powermax help
Posted: Fri Apr 10, 2009 9:09 am
by Lennart
Hi Paul,
Yes, of course. I forgot: Visonic is 868 over here, so it won't work with these standard versions... Sorry. Maybe Waakzaamwonen can get you a 433 MHz version, so good thing that you mailed them. And otherwise: did you check eBay, etc.?
Lennart
Powermax help
Posted: Fri Apr 10, 2009 9:19 am
by paulh
I've looked on ebay but nothing there at the moment.
Powermax help
Posted: Fri Apr 10, 2009 10:31 am
by b_weijenberg
Check with Mario from
http://www.domolandia.com
In Spain they use the 433 version.