Laatste versie plugin
Posted: Mon May 25, 2009 9:02 pm
De laatste versie van de plugin is versie 0.3 (nog steeds).
This version includes some charts for total usage and the actual usage. These charts are updated automatically (10s interval for the actual usage and 5m for the total usage). I will add more charts in the near future. Because the charting functionality is not part of the plugin but implemented using asp.net scripts, it can be upgraded independent of the plugin.
Changelog for beta 0.3:
Fixes:
- Multiple devices can now be turned on or off from within one action.
- Fixed writing statistics to the database
- When Homeseer is started any state changes that occurred while Homeseer was not running are now correctly determined
- The control buttons will no longer be hidden when the manual state changes of a device are disabled. I could not get this feature stable, sometimes it worked, sometimes it did not.
New features:
- User and password for the Plugwise Source web server can now be configured
- Besides on and off the status of a device can now be offline or unknown according to the status of the device in the Plugwise Source.
- When homeseer is started the status of all devices is set to unknown. This will be updated after the first poll of the Plugwise Source web server.
- When a device is locked using the Plugwise Source directly, this is reflected in Homeseer. When a device is locked in the Plugwise Source, the lock status can no longer be configured using Homeseer.
- When the status of a device is offline or locked, the device can no longer be switched to on or off.
- New configuration options are available to use the location (room) and/or device type as specified in the Plugwise Source.
- Authentication for the Plugwise Webserver is now supported and can be configured using the plugin configuration screen.
- Available actions for Plugwise devices in events are limited to on and off.
Installation instructions:
Fresh install:
1. Download plugin from http://house.klootwijk.org/downloads/hs ... se-0.3.zip
2. Copy the following files to their target location
All files in the /html directory to <homeseer dir>/html
/data/Plugwise/plugwise.mdb to <homeseer dir>/data/Plugwise
/hspi_Plugwise.dll to <homeseer dir>
All files in the /Plugwise directory to <plugwise dir>/www (NOTE: This is the directory the Plugwise Source software is installed in)
3. Restart Homeseer
4. Enable the Plugwise plugin from the setup/interfaces screen
5. Configure the plugwise plugin
Upgrade from previous beta:
1. Stop Plugwise plugin in Homeseer
2. Select all plugwise devices in the status screen and delete them
3. Go to fresh install
How to enable the charts:
1. Download visifire components from http://www.visifire.com
2. Copy the following files to the <homeseer dir>\html\Plugwise directory:
- Visifire2.js
- SL.Visifire.Charts.xap
3. Make sure Microsoft silverlight is installed on the computer where you want to view the charts
Rene.
Rene.
This version includes some charts for total usage and the actual usage. These charts are updated automatically (10s interval for the actual usage and 5m for the total usage). I will add more charts in the near future. Because the charting functionality is not part of the plugin but implemented using asp.net scripts, it can be upgraded independent of the plugin.
Changelog for beta 0.3:
Fixes:
- Multiple devices can now be turned on or off from within one action.
- Fixed writing statistics to the database
- When Homeseer is started any state changes that occurred while Homeseer was not running are now correctly determined
- The control buttons will no longer be hidden when the manual state changes of a device are disabled. I could not get this feature stable, sometimes it worked, sometimes it did not.
New features:
- User and password for the Plugwise Source web server can now be configured
- Besides on and off the status of a device can now be offline or unknown according to the status of the device in the Plugwise Source.
- When homeseer is started the status of all devices is set to unknown. This will be updated after the first poll of the Plugwise Source web server.
- When a device is locked using the Plugwise Source directly, this is reflected in Homeseer. When a device is locked in the Plugwise Source, the lock status can no longer be configured using Homeseer.
- When the status of a device is offline or locked, the device can no longer be switched to on or off.
- New configuration options are available to use the location (room) and/or device type as specified in the Plugwise Source.
- Authentication for the Plugwise Webserver is now supported and can be configured using the plugin configuration screen.
- Available actions for Plugwise devices in events are limited to on and off.
Installation instructions:
Fresh install:
1. Download plugin from http://house.klootwijk.org/downloads/hs ... se-0.3.zip
2. Copy the following files to their target location
All files in the /html directory to <homeseer dir>/html
/data/Plugwise/plugwise.mdb to <homeseer dir>/data/Plugwise
/hspi_Plugwise.dll to <homeseer dir>
All files in the /Plugwise directory to <plugwise dir>/www (NOTE: This is the directory the Plugwise Source software is installed in)
3. Restart Homeseer
4. Enable the Plugwise plugin from the setup/interfaces screen
5. Configure the plugwise plugin
Upgrade from previous beta:
1. Stop Plugwise plugin in Homeseer
2. Select all plugwise devices in the status screen and delete them
3. Go to fresh install
How to enable the charts:
1. Download visifire components from http://www.visifire.com
2. Copy the following files to the <homeseer dir>\html\Plugwise directory:
- Visifire2.js
- SL.Visifire.Charts.xap
3. Make sure Microsoft silverlight is installed on the computer where you want to view the charts
Rene.
Rene.