Page 1 of 1
Username / password
Posted: Tue Oct 06, 2009 10:38 pm
by TANE
I found out that there is a username/password on my Rfxcom Ethernet device. Problem is I don't remember that anymore
I'm looking for reset option.
Is the username Admin?
both fields blank is not working.
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
Username / password
Posted: Tue Oct 06, 2009 10:44 pm
by esschenk
Hello
Strange mine login has no login and passwoord
just enter
Ed
Username / password
Posted: Tue Oct 06, 2009 10:50 pm
by TANE
yes....and I always change that...
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
Username / password
Posted: Tue Oct 06, 2009 11:08 pm
by TANE
Question
What is the default User Name and Password to access the web configuration interface for a WiBox, Xport or WiPort running 6.x firmware?
Answer
By default there is no username or password defined, so leave the username and password fields blank and click OK to get to the web manager. If a telnet or enhanced password is defined, enter it into the password field and leave the username field blank and click OK to get to the web manager.
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
Username / password
Posted: Tue Oct 06, 2009 11:09 pm
by TANE
founded...:)blank username was the trick
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
Username / password
Posted: Tue Oct 06, 2009 11:32 pm
by Snelvuur
hehe , i had the exact same issue when i hooked it up to homeseer last week
// Erik (binkey.nl)