RFXomm DIY relay
Posted: Thu Oct 15, 2009 12:09 am
On this page (spec of the 433 MHz receiver) I read the following:
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">
DIY extension possibilities:
There are connection possibilities for a pushbutton switch and a relay.
When the pushbutton input is low, the device address of a received X10 command is saved. A received On-Off command for this device address will switch the Relay output.<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Did anyone try or do this already, or is there a description of how to do it and which components to use ?
[edit:] I found more detailed documentation in theRFreceiver document (page
, question remains if anyone did it already and with which (relay) component.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">
DIY extension possibilities:
There are connection possibilities for a pushbutton switch and a relay.
When the pushbutton input is low, the device address of a received X10 command is saved. A received On-Off command for this device address will switch the Relay output.<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Did anyone try or do this already, or is there a description of how to do it and which components to use ?
[edit:] I found more detailed documentation in theRFreceiver document (page
, question remains if anyone did it already and with which (relay) component.