Home Automation Domotica Forum Europe, Bwired Forum

After some brainstorming with Tailwind , here's a list of wall dock's for Ipod

http://www.coloradovnet.com/uploads/581 ... asheet.pdf

http://www.gizmoactive.com/ipod-in-wall ... -dock.html

http://www.home-technology-store.com/ho ... A0312.aspx#

I also found this one: http://www.privetconsultancy.co.uk/ecom ... f59aa6.jpg

It is however a demo ecommerce page. I cannot find the piece anywhere else. This could be the way to mount it to the wall and than place a nice cover over it (wood/plexiglass) to hide the chargingcable and let it look like a nice mounted touchscreen.


<hr noshade size="1">
<font size="1">Why Tailwind? Because Jeffrey was already registered ...</font id="size1">

Jeffrey, it looks like a clip. there are no holes in the back, so cable should go down , this means a larger bezel

On the demo page it's described as a wall mount. It should do the trick when putting a custom made cover over it.

<hr noshade size="1">
<font size="1">Why Tailwind? Because Jeffrey was already registered ...</font id="size1">

I'm also locking for something for usage with HST on the second floor.

just a basic case..

something like this one..




<hr noshade size="1"><font size="1">Enver
twitter.com/Chak64%20My%20Domotica%20Lo ... dware.html<i> My Domotica Hardware Software</i></font id="size1">

Has anybody already integrated the iPod Touch into the wall? I want to use the iPod as a cheap touchpanel to control Homeseer on the first floor.
I looked on the internet and found this: http://www.slashgear.com/iport-control- ... r-1570011/

I could make one myself from wood but the buttons would be a challenge.
(Wooden case with small strong magnets and a metal or wooden cover; I would need to find somebody to lasercut the metal top plate; Is Stainless steel magnetic?)

I don't want the ipod to be recognizable (except GUI) as an iPod

Enver: I cannot see your picture anymore.

Any idea's or experience?