Page 1 of 1
Braun Triumph Smartguide domotica integration?
Posted: Sat Oct 24, 2009 1:47 pm
by Jeffrey
I have a Braun Triumph Smartguide toothbrush where the time and other information is shown on the Smartguide screen.
I was wondering if someone has already tried to recieve the signals from the toothbrush/smartguide?
<hr noshade size="1">
<font size="1">Why Tailwind? Because Jeffrey was already registered ...</font id="size1">
Braun Triumph Smartguide domotica integration?
Posted: Sat Oct 24, 2009 1:50 pm
by Jeffrey
Here's a picture of it:
Apparently it's using bluetooth to communicatie (google result).
<hr noshade size="1">
<font size="1">Why Tailwind? Because Jeffrey was already registered ...</font id="size1">
Braun Triumph Smartguide domotica integration?
Posted: Sun Oct 25, 2009 10:33 pm
by Alexander
mmm, i have the same braun. Never considered this to try to communicate with the device. And i don't know where to start ...
Alexander
Braun Triumph Smartguide domotica integration?
Posted: Sun Oct 25, 2009 11:04 pm
by TANE
funy...BT navigation for toothbrush
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
Braun Triumph Smartguide domotica integration?
Posted: Mon Oct 26, 2009 1:44 pm
by Jeffrey
You can use this to let the system know that your going to bed or are awake (depending on the time of the day).
Also you can keep stats about your brushing habbits [:D]
<hr noshade size="1">
<font size="1">Why Tailwind? Because Jeffrey was already registered ...</font id="size1">
Braun Triumph Smartguide domotica integration?
Posted: Mon Oct 26, 2009 3:29 pm
by Alexander
yes i know, but don't know where to start to try to communicate with the device.
Alexander