Home Automation Domotica Forum Europe, Bwired Forum

Hello,

Here you can see my Homemade CTX35 interface
The total price for the unit is about 60,-
If you buy one in the shop then the price is about 200,-
The unit is simple to make with a second hands ctx15
Its working perfect with Homeseer

http://www.domotica.famschenk.eu/Modemade_CTX35.html


See also topic:
http://www.domoticaforum.eu/topic.asp?T ... erms=ctx15


Ed

Nice work ed.


<hr noshade size="1"><font size="1">Enver
Twitter http://twitter.com/Chak64%20My%20Domoti ... tane.nl/wp</font id="size1">

Good to know there is knowledge on the forum to built/modify hardware.
I will be checking your site more often.

Please keep us updated on new projects you are working on.

**Jeroen**

Thats looks nice. But can you show the otherside of the print.
In other words where are the wires.

Hello,

The unit is fully operational
I forgot to make pictures from de backsite
But the wiring is straigt forward
If you need any assitent for the wiring
i wil make a wiring diagram for you

Ed

The 'partlist' on your website does not list the 'condensator' and transistor that are soldered on the PCB. Can you tell me what they do and how they are wired?

Hello,

The condensator and the power regulator
are a part of the powersupply.
I will make a part list on my website for the powersupply

Ed

Of is dat exact 't schema zoals te zien op http://www.circuitsonline.net/schakelin ... eding.html ? Dan lukt 't mij nog wel Nu ik er wat beter naar kijk denk ik alle onderdelen te zien. Dat zwarte ronde ding zal je brugcel zijn?

Tozz, could you use english please, i think your post is important for everybody. Thanks a lot. Lorenzo

Hoi,

Yes thats the right schematic
Its a very simple and basic diagram
The Buffer Elko might be about 680 uF instead of 2200uF
The round thing is the rectifyer (brugcel)

Ed