Page 1 of 2
The Aeon Labs door/window sensor.
Posted: Fri Dec 18, 2009 3:05 pm
by beatboxer05
Hello everyone,
At the moment I am active with the Z-wave technology. I want to buy the Aeon labs door/window sensor, but I need to know if this module works under homeseerpro. Please leave a message behind if you know the answer for my question.
Kind regards,
Niek
Re: The Aeon Labs door/window sensor.
Posted: Tue Dec 29, 2009 10:24 pm
by Alexander
Yep HS is compatible.
Re: The Aeon Labs door/window sensor.
Posted: Tue Dec 29, 2009 11:32 pm
by abl
Can anyone tell me how to install this device (I didn't get the manual)? I just googled but I only got information how to include this in your z-wave network not how to install this actually...
For someone that has done this many times this might seem obvious, but for a layman as me I'm not sure what to do...
Re: The Aeon Labs door/window sensor.
Posted: Tue Dec 29, 2009 11:52 pm
by Alexander
What do you mean with install: physical or software-based?
Re: The Aeon Labs door/window sensor.
Posted: Wed Dec 30, 2009 9:45 am
by abl
I meant the physical installation.
Re: The Aeon Labs door/window sensor.
Posted: Wed Dec 30, 2009 11:17 am
by Alexander
This manual you did see?:
http://www.aeon-labs.nl/download/AEO_DWSENS_in_en.pdf
To install, just mount one part on the frame and the other one on the door. Such as :
http://www.eemlandtechniek.nl/illu/alarm/PICT0016.JPG
Re: The Aeon Labs door/window sensor.
Posted: Wed Dec 30, 2009 10:09 pm
by structor
In my test setup I have one running and it was by far the easiest device to mount and configure. It's as simple as screwing the frame on the doorframe and the magnet on the door. Place the device, place the outerhull over magnet done... If you have a specific question, just ask.
Re: The Aeon Labs door/window sensor.
Posted: Wed Dec 30, 2009 10:36 pm
by Alexander
Structor,
Can you please post some pictures of the inside. I'm curious if it is easy to connect wires to the system instead of using the magnet system.
Re: The Aeon Labs door/window sensor.
Posted: Wed Dec 30, 2009 10:38 pm
by structor
Alexander wrote:Structor,
Can you please post some pictures of the inside. I'm curious if it is easy to connect wires to the system instead of using the magnet system.
Yup I will post some images tomorrow.
Re: The Aeon Labs door/window sensor.
Posted: Wed Dec 30, 2009 11:10 pm
by mhn
According to zwaveworld forum, you have to use the Everspring door sensor for easy modding (Or whatever brand it is sold as.)
Regards
Morten
Re: The Aeon Labs door/window sensor.
Posted: Wed Dec 30, 2009 11:40 pm
by Alexander
you mean this post? :
http://zwaveworld.com/forum/index.php?showtopic=553
Are you a user on that forum? If so, can you post the pictures from that topic to this one?
Re: The Aeon Labs door/window sensor.
Posted: Thu Dec 31, 2009 12:03 am
by mhn
Yes I am a user there.
I reduced the big pictures.
- hrds1.jpg (34.4 KiB) Viewed 9828 times
- hrds16.jpg (25.67 KiB) Viewed 9828 times
- PICT0190-1.jpg (18.31 KiB) Viewed 9828 times
- PICT0192-1.jpg (16.63 KiB) Viewed 9828 times
Regards
Morten
Re: The Aeon Labs door/window sensor.
Posted: Thu Dec 31, 2009 1:01 am
by Alexander
Okay, so that is the door/window sensor you are refering to. Hopefully Structor can post some inside pictures of the Aeon Labs.
Re: The Aeon Labs door/window sensor.
Posted: Thu Dec 31, 2009 10:45 am
by mhn
In Denmark it is sold as Flex-Control FC-0011.
Regards
Morten
Re: The Aeon Labs door/window sensor.
Posted: Thu Dec 31, 2009 12:29 pm
by structor
