New Release Source 2.14 now available!
Posted: Thu Mar 04, 2010 12:46 am
** This update is for all users **
Plugwise Source 2.14 Release 20100302
After you install this update, click the update button again to update to firmware (update release) version 2: 2009-09-08
Fixed:
-#799 OTA: When updating multiple networks, the windows close unexpectedly
-#761 Not all retrieved data is processed; graphs show gaps
-#752 Fast schedule verification does not work when schedule contains standby values
-#748 Cannot remove Switch that does not come online
-#709 Week, month en year graphs do not distinguish between usage and production
-#705 Wrong week numbers in Dutch
-#703 USB icon stays in Busy state after sending broadcast groups.
-#695 Peak/offpeak graph not correct in weekends
-#691 After deleting a room, appliances do not show up in list
-#690 ConfWiz: After every run an new tariff is added.
-#622 Switch button list not visible yet just after adding first Switch
-#596 OTA: no updates when network only consists of Stick and Circle+
-#499 OTA: Update of unassigned Stick failes
-#465 Save button not fully visible in Tariff screen
-#444 OTA: Cannot select network in case of multiple networks
- Serveral crashes
Changes:
- Appliances: Power production has a seperate column
- Tariff: Days of week to use peak tariff for are selectable
- Pro: Network names can be changed
- Pro: List of networks added
- Setup: Any installed PDF reader will be detected, not just Acrobat Reader
- OTA: Suppport for Switch
- OTA: Will now work via Stretch Lite Pro
- OTA: Update multiple networks simultaneously
Known issues:
- Manuals need updating
Notes:
- If you're having unexplainable holes in the graphs of one ore more appliances do the following. In the Reports screen, select the appliance, click the refresh button while holding down the Shift key and then wait for a few minutes.
Plugwise Source 2.12 Release 20091224
Fixed:
-#634 Switching schedules not activated / standby killer not working
-#609 Long periods of high CPU usage
-#598 Downloading updates fails if ReadMe.rtf is opened and locked by MS Word
-#471 Savings numbers not correct when period starts on any other day than monday
Changes:
- When Reports or Appliances screen is open, the currently selected appliances are refreshed about every 5 seconds (plus the total time required to query the modules of those appliances).
- Source is activated directly after completing Configuration wizard. The activation mail is no longer required.
Plugwise Source 2.14 Release 20100302
After you install this update, click the update button again to update to firmware (update release) version 2: 2009-09-08
Fixed:
-#799 OTA: When updating multiple networks, the windows close unexpectedly
-#761 Not all retrieved data is processed; graphs show gaps
-#752 Fast schedule verification does not work when schedule contains standby values
-#748 Cannot remove Switch that does not come online
-#709 Week, month en year graphs do not distinguish between usage and production
-#705 Wrong week numbers in Dutch
-#703 USB icon stays in Busy state after sending broadcast groups.
-#695 Peak/offpeak graph not correct in weekends
-#691 After deleting a room, appliances do not show up in list
-#690 ConfWiz: After every run an new tariff is added.
-#622 Switch button list not visible yet just after adding first Switch
-#596 OTA: no updates when network only consists of Stick and Circle+
-#499 OTA: Update of unassigned Stick failes
-#465 Save button not fully visible in Tariff screen
-#444 OTA: Cannot select network in case of multiple networks
- Serveral crashes
Changes:
- Appliances: Power production has a seperate column
- Tariff: Days of week to use peak tariff for are selectable
- Pro: Network names can be changed
- Pro: List of networks added
- Setup: Any installed PDF reader will be detected, not just Acrobat Reader
- OTA: Suppport for Switch
- OTA: Will now work via Stretch Lite Pro
- OTA: Update multiple networks simultaneously
Known issues:
- Manuals need updating
Notes:
- If you're having unexplainable holes in the graphs of one ore more appliances do the following. In the Reports screen, select the appliance, click the refresh button while holding down the Shift key and then wait for a few minutes.
Plugwise Source 2.12 Release 20091224
Fixed:
-#634 Switching schedules not activated / standby killer not working
-#609 Long periods of high CPU usage
-#598 Downloading updates fails if ReadMe.rtf is opened and locked by MS Word
-#471 Savings numbers not correct when period starts on any other day than monday
Changes:
- When Reports or Appliances screen is open, the currently selected appliances are refreshed about every 5 seconds (plus the total time required to query the modules of those appliances).
- Source is activated directly after completing Configuration wizard. The activation mail is no longer required.