Home Automation Domotica Forum Europe, Bwired Forum

I'm looking for small Z-wave dimmers of switches, everything I've seen so far is quite big. I used KAKU before, they have small micro switches which can be placed even behind your existing wallmounted switches. I pried open a Duwi ZW ES 1000 switch, just to see if it's just a big housing, and if I can get the circuitboard out and mount it inside a lamp armature. No luck, it has two pcb's, one for the electronics and manual switches, and one for the electric parts. There's a large condensor, a very large relais and an oversized fuse holder (holds 2 fuses, one spare). Choosing smaller parts can easily reduce this to half it's total size, but I can't find a manufacturer that's working on this. Weird, because Zensys claims to have a very small form factor RF module.
Maybe the Qees models will hold smaller parts, can't wait till they are available.

Maybe it's time for a DIY Z-wave micro PCB project?

Or maybe just wait a month or 2 for the Aeon-Labs In-Wall micro switches, next week we know more about the new products but they look and feel real great (I have a sample here what can be controlled over z-wave and by a normal switch, so you don' t need to replace all you current switches)

That sounds awesome.
Hope they will indeed be available in 2 months or so.

@EZHome: any pics available? Please post these if possible. Sounds great indeed.

EzHome wrote:Or maybe just wait a month or 2 for the Aeon-Labs In-Wall micro switches, next week we know more about the new products but they look and feel real great (I have a sample here what can be controlled over z-wave and by a normal switch, so you don' t need to replace all you current switches)

That's great News!
I was hoping to get some replies in this thread a while back.

Looking forward to any pictures

I'll take some pictures tomorrow and post them here.

I'm also looking forward to these pictures.

Count me in......

Here it is, smallest micro z-wave Smart Energy Switch. It can be locally controlled by a normal light switch so there is no need to buy complete new switches etc.

The device supports energy metering and push status to your z-wave controller.

Dimensions: 51x49x19mm

This one is only a (working) sample and the final one is in redesign because of some minor changes, as soon as the final version is available I'll send a newsletter and make a post here on the forum so keep coming back or sign up to our newsletter.

That actually looks quite big.
Hope it will fit in a normal round wallmount? (inbouwdoos).

These pictures are closeup's, size is 51x49x19mm and yes they fit well. But there is a little redesign in the connectors.

Hmm, looks like an interesting option to get on the Z-wave wagon

Any idea when and if a european U-SNAP I/O controller will be available to use on my guruplug?

Are this engineering samples?

These are preproduction samples, some minor changes have to be made.

After SmartHomes 2010 fair I hope I can tell you some more.

EzHome, pse keep us informed.