Home Automation Domotica Forum Europe, Bwired Forum

Hi,

Can i also use this schema for dutch electricity meters (draaistroommeter). I already have bought already a ds2423 form hobby-boards

http://www.domoticaforum.eu/uploaded/Di ... ematic.jpg

regards

Richard

This schematic was (actually IS, but not for long anymore) monitoring for gas usage ("the reflecting 6"). If your electricitymeter has this same feature as the gas meter, i wouldn't know why not...

Regards,
Robert.

Hi Robert,

Let me know if you are not using it anymore, i have de ds2423 (hoobyboards) already, so I only need the rest of it. Power supply i als o have.

richard

Richard,

Look here:
http://www.domoticaforum.eu/topic.asp?TOPIC_ID=111

This topic contains the schematic. So if you're only a little bit handy with a soldering iron, i would DIY. Not that i won't let you have the one i built, but it's (IMO) much more fun doing those things yourself...

Just let me know what you prefer...

Robert.

sorry to kick this old topic, but i was wondering: there are differences between the 2 proposed schema's.
I know that one is completely battery powered and the other 5V powered.
Is the 2006943437_gas-schematic.jpg correct? (full dot means connection between crossing wires? and the second diode (left) just above the battery is not connected to anything?)

When you have a look at the Hobbyboards 1-Wire Dual Counter schematic you'll recognize parts of it.

Answers to your questions:

Yes, well it worked for me
Yes.
See the Hobbyboards schematic.

I tried the layout from the first post, but i do not get any ticks...
When i hold the cny70 under a light i do get an increase (tick).
Does anyone had this problem too?