Home Automation Domotica Forum Europe, Bwired Forum

With much help of Willi Herzig, we got in fhem also support for the rfxmeter.

Here some screenshots and configs

RFXMETER:
RFXGas (CNT: 2104.17)
RFXPower (CNT: 7820.434)
RFXWater (CNT: 211419)

fhem> l RFXPower
Internals:
CODE 01
DEF 01 0.001 kwh
IODev RFXCOM
NAME RFXPower
NR 9
STATE CNT: 7820.451
TIME 2011-01-05 20:14:52
TYPE RFXMETER
scalefactor 0.001
unitname kwh
Readings:
2011-01-05 20:14:52 meter 7820.451 kwh
Attributes:
room RFXMETER

fhem> l RFXGas
Internals:
CODE 02
DEF 02 0.01 cu_m
IODev RFXCOM
NAME RFXGas
NR 12
STATE CNT: 2104.2
TIME 2011-01-05 20:15:24
TYPE RFXMETER
scalefactor 0.01
unitname cu_m
Readings:
2011-01-05 20:15:24 meter 2104.2 cu_m
Attributes:
room RFXMETER

fhem> l RFXWater
Internals:
CODE 00
DEF 00 0.5 ltr
IODev RFXCOM
NAME RFXWater
NR 6
STATE CNT: 211429
TIME 2011-01-05 20:15:23
TYPE RFXMETER
scalefactor 0.5
unitname ltr
Readings:
2011-01-05 20:15:23 meter 211429 ltr
Attributes:
room RFXMETER

Looks excellent, it got my interest spiked into probably using this for "meterkast" measurements

But not to ruin the party too much. I'll have to ask one of the global moderators to move this small bit towards the RFXcom forums as this post is a pure RFXcom party

There should be maybe an softtware fhem topic??/

I must say there'll be a FHEM influence in this sub-forums a lot, but that mainly due to the software availability (open source) for the FS20 devices.

I've solved it by "moving" it to the right subforums but leaving a shadow post in here.

Speaking of FHEM... Have you adressed this nice progress to the fhemobile dev already so he can incorporate the graphics onto your iPad/iPhone/iPod?

Well there is no support form fhemobile yet, but in the next version the oregon sensors will be supported.

For support for the rfxcommeter, I must know how de em1010wz looks like so I can look how to get the rfxcommeter supported.

There is also a way to make fake devices on fhem, and run a script and trigger values

for example, now I make from an oregon an HMS device, to see it in fhemobile

#!/bin/sh
datum=$(date +%Y-%m-%d)
tijd=$(date +%H:%M:%S)
temp=$(/usr/bin/tail -n1 /var/log/fhem/buiten-2011.log | cut -d " " -f4)
hum=$(/usr/bin/tail -n1 /var/log/fhem/buiten-2011.log | cut -d " " -f7)

/usr/bin/fhem.pl localhost:7072 'trigger Buitentemp T: '$temp' H: '$hum' Bat: ok; {\
$defs{Buitentemp}{STATE}="T: '$temp' H: '$hum' Bat: ok";;\
$defs{Buitentemp}{READINGS}{temperature}{VAL}="'$temp' (Celsius)";;\
$defs{Buitentemp}{READINGS}{temperature}{TIME}="'$datum' '$tijd'";;\
$defs{Buitentemp}{READINGS}{humidity}{VAL}="'$hum' (%)";;\
$defs{Buitentemp}{READINGS}{humidity}{TIME}="'$datum' '$tijd'";;\
$defs{Buitentemp}{READINGS}{battery}{VAL}="ok";;\
$defs{Buitentemp}{READINGS}{battery}{TIME}="'$datum' '$tijd'"}'

em1010wz, I don't think that device exists. Do you mean the EMwz (em1000wz) or the EMpc (em1010pc).
Anyway, if you need information on the em1000wz, let me know. I have one incoming in this weeks ELV shipping

I'm not a super techy dude, but tell me what to monitor and I'll send you a dump of the em1000wz communications.

Jelle