VSCP & Friend 0.3.0 Carbon is out
Posted: Tue Mar 29, 2011 11:12 pm
The 0.3.0 Carbon release of VSCP & Friends is out. The code can be downloaded from Sourceforge at http://sourceforge.net/projects/m2m/fil ... %20Carbon/. More information can be obtained at the project website http://www.vscp.org
- A new TCP/IP based VSCP Driver model in place. A very good diagnostic tool with many features.
- A Level II logger driver in place.
- A Level II bluetooth proximity driver in place. Detect bluetooth devices coming in and going out of a zone.
- A Level II raw ethernet driver in place. Very low cost ethernet devices can be used that does not need a TCP/IP stack. The nodes can be fully plug and play and use PoE. Just insert a tempdevice into an ethernet socket and it will work right away without any configuration.
- The internal decision matrix of the daemon is now fully functional. Complex control scenarios can be set up.
Enyoy!
- A new TCP/IP based VSCP Driver model in place. A very good diagnostic tool with many features.
- A Level II logger driver in place.
- A Level II bluetooth proximity driver in place. Detect bluetooth devices coming in and going out of a zone.
- A Level II raw ethernet driver in place. Very low cost ethernet devices can be used that does not need a TCP/IP stack. The nodes can be fully plug and play and use PoE. Just insert a tempdevice into an ethernet socket and it will work right away without any configuration.
- The internal decision matrix of the daemon is now fully functional. Complex control scenarios can be set up.
Enyoy!