Page 1 of 1
asus wl-500 and rs232
Posted: Fri May 06, 2011 8:36 pm
by jumper
Hi All,
Sorry, i'm a bit new here and have some questions. I hope there are some people who can and wants to help me out .
I want to set up a domotica system throught RS232 through asus wl-500 router (as webserver)
how can i read the communication ? I thinks you will suggest php too. How to read in and out?
Thx advanced.
Re: asus wl-500 and rs232
Posted: Fri May 06, 2011 9:03 pm
by Digit
There seems to be some info available here:
http://www.google.nl/search?q=php+serial+port
My experience with php is limited, but I guess the results from the link I mentioned will give you a good starting point.
Re: asus wl-500 and rs232
Posted: Fri May 06, 2011 9:34 pm
by jumper
Thx Digit,
but it doesn't have to be php, was more a suggestion. Especially for asus router. Little system to run and can be reached everywhere .
Vb on a webserver is not possible, i thinks.
my mention was to reach my domotica through internet (read temperature, state of contacts etc) and saving to a stick .
thats why i want to ask it.
So i try here to get help with information also.
Re: asus wl-500 and rs232
Posted: Wed Jul 13, 2011 7:10 pm
by pinx
Looks like my Micasaverde Vera. That is based on WL-500, too. The firmware is named Mios nowadays. Maybe there is some open source you can use.
Vera has RS-232 support. Check their forum.
Re: asus wl-500 and rs232
Posted: Thu Jul 14, 2011 9:12 am
by r_255
Sure that is possible... !
Have a look at the formal chupa forum :
http://wl500g.info/archive/index.php/t-1993.html