Kaku Problems not receiving Off command
Posted: Sun May 29, 2011 1:30 pm
Hi all I'am new
I own for several years KaKu modules
Receivers
3 x YC412
5 x par1000
Build in types for ceiling lights
Senders
TMT2100
YCT1000
PAT103
Promlem is that Switching on devices is no problem even if we go outside the building no problem. But switsching off is 99% not woking only if we stand 1 meter form the receiver.
Anyone familiar with this problem
The onlu other wireless products we use are
1 Linksys wrt610N with Ddwrt firmware 2,5 Ghz band
1 Jablotron wireless Alarm 433 Mhz band
I own for several years KaKu modules
Receivers
3 x YC412
5 x par1000
Build in types for ceiling lights
Senders
TMT2100
YCT1000
PAT103
Promlem is that Switching on devices is no problem even if we go outside the building no problem. But switsching off is 99% not woking only if we stand 1 meter form the receiver.
Anyone familiar with this problem
The onlu other wireless products we use are
1 Linksys wrt610N with Ddwrt firmware 2,5 Ghz band
1 Jablotron wireless Alarm 433 Mhz band