Home Automation Domotica Forum Europe, Bwired Forum

Posted: **Wed Jul 04, 2012 8:38 am**

I have a working setup with thermometers and hygrometers. When I added a RFXMeter with a Photo Sensor. Domotiga sees it just fine:

Code: Select all

2012/07/04 08:27:47 [RFXComTRX] Battery       = OK
2012/07/04 08:27:57 [RFXComTRX] < 0A71004D00F00000000589
2012/07/04 08:27:57 [RFXComTRX] Packettype    = RFXMeter
2012/07/04 08:27:57 [RFXComTRX] Subtype       = RFXMeter counter
2012/07/04 08:27:57 [RFXComTRX] Sequence no.  = 77
2012/07/04 08:27:57 [RFXComTRX] ID            = rfxmeter 0xf0
2012/07/04 08:27:57 [RFXComTRX] Counter       = 5
2012/07/04 08:27:57 [RFXComTRX] if RFXPwr     = 0.005 kWh
2012/07/04 08:27:57 [Devices] Device of type 'RFXMETER' with address 'rfxmeter 0x240' and interface 'RFXCom Tranceiver' not found!
2012/07/04 08:27:57 [RFXComTRX] Signal level  = 8
2012/07/04 08:27:57 [RFXComTRX] < 0A71004E01F10000000789
2012/07/04 08:27:58 [RFXComTRX] Packettype    = RFXMeter
2012/07/04 08:27:58 [RFXComTRX] Subtype       = RFXMeter counter
2012/07/04 08:27:58 [RFXComTRX] Sequence no.  = 78
2012/07/04 08:27:58 [RFXComTRX] ID            = rfxmeter 0x1f1
2012/07/04 08:27:58 [RFXComTRX] Counter       = 7
2012/07/04 08:27:58 [RFXComTRX] if RFXPwr     = 0.007 kWh
2012/07/04 08:27:58 [Devices] Device of type 'RFXMETER' with address 'rfxmeter 0x497' and interface 'RFXCom Tranceiver' not found!
2012/07/04 08:27:58 [RFXComTRX] Signal level  = 8

1. Why does it send as two different sensors? (240 and 497)

2. What settings do I use in "Devices"? There is no "RFXMeter" under "Device". I have tried some different combinations, but nothing seems to work.

Posted: **Wed Jul 04, 2012 11:53 am**

how many sensors PCB's are in the rfxmeter, normally it can hold 3.
in your case i think there are 2 mounted?

Posted: **Wed Jul 04, 2012 12:45 pm**

Reset counter 2 if the 2nd RFXPulse is not installed. This will stop reporting counter 2

Posted: **Wed Jul 04, 2012 9:26 pm**

Thanks for the quick replies. I have only one sensor in position 0, nothing else. I will try your suggestions.

What settings do I use in Domotiga "Devices"? There is no "RFXMeter" under "Device". I have tried some different combinations, but nothing seems to work.

Posted: **Thu Aug 02, 2012 2:42 pm**

Choose 'RFXPwr Power' as devicetype.
Or enable 'auto device create' under main settings and let it generate it automatically.
Add it to group 'Energy' to display it's graphs and data.

Home Automation Domotica Forum Europe, Bwired Forum

Newbie Question about RFXMeter

Newbie Question about RFXMeter

Re: Newbie Question about RFXMeter

Re: Newbie Question about RFXMeter

Re: Newbie Question about RFXMeter

Re: Newbie Question about RFXMeter