Home Automation Domotica Forum Europe, Bwired Forum

Rls=0.1.209.r467

In some cases after starting Domotiga, I have the following message in debug while receiving data from the Oregon Scientific sensor THGR122NX:

2012/08/31 21:03:36 1A2D107D10 Noise or an unknown data packet received! bits=26
2012/08/31 21:03:36 227044393550 HE Device=1C110E4 Unit=6 GROUP ON bits=34

I then have to disable in RFXCom commander HE UK, and a normal message is receid:

2012/08/31 21:06:12 22704439352012/08/31 21:06:22 [RFXComRX] Disable HomeEasy UK => F028
2C2012/08/31 21:06:22 ACK
2012/08/31 21:06:51 501A2D107D102270443935 TH1[32001] THGN122N,THGR122NX,THGR228N,THGR268 CH 1 addr:7D temp:22.1°C | 71.78°F hum:47 Comfort Battery OK2012/08/31 21:06:51 [Devices] Interface with name
'RFXCom Receiver' has id '1'
2012/08/31 21:06:51 [Devices] Device with address 'TH1[32001]' is 'VS21-BK Hygro Sensor'
2012/08/31 21:06:51 [Devices] ValueUpdate() called for device with id '9' and name 'VS21-BK Hygro Sensor'
bits=80

Any forum member have an idea what causes this?

Regards
OWK