Page 1 of 1
Wireless power sensor (220v)
Posted: Sun Oct 14, 2012 6:06 pm
by scasic
I'm looking for wireless power sensor compatible with rfxcom which can send information about power outage.
Could someone suggest me a model?
thanks
Re: Wireless power sensor (220v)
Posted: Tue Oct 16, 2012 10:38 pm
by knasen17
That makes two of us! Conrad has one, but I dont think it is supported by rfxtrx433
Re: Wireless power sensor (220v)
Posted: Tue Oct 16, 2012 11:14 pm
by b_weijenberg
connect this sensor and it transmits an ON command on a power outage.
http://www.klikaanklikuit.nl/shop/produ ... -awmt-231/
Re: Wireless power sensor (220v)
Posted: Wed Oct 17, 2012 10:09 am
by Moskus
But is it a power sensor?
Re: Wireless power sensor (220v)
Posted: Wed Oct 17, 2012 10:48 am
by b_weijenberg
this module is normally connected over the contact of a wall switch.
If the switch is open the module detects 230V through the connected lamp and the module transmits an OFF command.
If the switch is closed the module detects no power and transmits an ON command.
Re: Wireless power sensor (220v)
Posted: Wed Oct 17, 2012 1:42 pm
by AshaiRey
Clever!
Re: Wireless power sensor (220v)
Posted: Thu Oct 18, 2012 3:11 pm
by Moskus
Oh yes, that IS clever. Is it possible to adjust the sensitivity?
Re: Wireless power sensor (220v)
Posted: Wed Oct 24, 2012 11:35 pm
by scasic
looks like a applicable workaround! thanks for the answer