Page 1 of 2
How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Nov 28, 2012 8:21 pm
by kriz83
Hi,
I'm running HomeSeer with RFXCom plugin.
When running RFXmngr, I get the following:
Code: Select all
0A5209054800003A510339
Packettype = TEMP_HUM
subtype = TH9 - Viking 02038, 02035 (02035 has no humidity)
Sequence nbr = 5
ID = 18432
Temperature = 5,8 °C
Humidity = 81
Status = Wet
Signal level = 3
Battery = OK
However, I'm unable to add this device to HomeSeer. In the logging I frequently find this:
Code: Select all
28/11/2012 19:14:21 - RFXCOM - ERROR : Unknown Sub type for Packet type=52:9
Can somebody help me adding this temperature (and humidity) sensor ?
Thx !
Kristof
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Nov 28, 2012 9:49 pm
by b_weijenberg
Will be added in the next plug-in version 15.0.0.16 (probably next week)
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Nov 28, 2012 10:53 pm
by kriz83
thx !
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Tue Dec 04, 2012 1:34 pm
by b_weijenberg
version 15.0.0.16 with Viking support is in the HS Updater
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Tue Dec 04, 2012 4:59 pm
by kriz83
thanks, will try it when I get back from work
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Dec 05, 2012 8:26 pm
by kriz83
Works now, but ...
I have a set of outdoor plugin modules from Elro (
link)
These used to work in RFXCom with Flamingo or Impuls. However, after the update this seems to be broken ...
HomeSeer loggin with Impuls:
Code: Select all
5/12/2012 19:19:13 - Device Control - Device: Kerstverlichting Buiten (C2) OFF
5/12/2012 19:19:13 - RFXCOM - (DeviceCmd) error unknown device: 23
Homeseer logging with Flamingo:
Code: Select all
5/12/2012 19:24:47 - Device Control - Device: Kerstverlichting Buiten (C2) OFF
5/12/2012 19:24:47 - RFXCOM - (DeviceCmd) error unknown device: 11
Any idea why this is happening ?
Gr,
Kriz
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Dec 05, 2012 9:30 pm
by b_weijenberg
this seems to be a serious problem, please contact support
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Dec 05, 2012 9:56 pm
by kriz83
How ?
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Dec 05, 2012 10:02 pm
by b_weijenberg
send an email to support rfxcom.com
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Dec 05, 2012 10:16 pm
by jakkes
Where can one buy this sensor? And are there more weatherstations supported in the new version of RFXcom?
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Dec 05, 2012 10:30 pm
by b_weijenberg
see chapter 2.2 for the RFXtrx433 supported products
http://www.rfxcom.com/Documents/RFXtrx% ... 0Guide.pdf
FineOffset/Viking, TFA, LA Crosse, Rubicson, UPM/ESIC and Oregon Scientific sensors are supported.
UPM/ESIC is not advised because of a bad range.
Preferred sensors are Oregon 2.1 or 3.0 sensors.
For the full list including a suppliers list see
http://www.rfxcom.com/oregon.htm
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Dec 05, 2012 10:30 pm
by Fischi
Hi, how to uopdate my RFXCOM plugin ?
Reg. Fischi
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Wed Dec 05, 2012 10:32 pm
by b_weijenberg
click the UPDATER button on the Homeseer screen.
And select the products to update.
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Thu Dec 06, 2012 12:09 am
by kriz83
b_weijenberg wrote:send an email to support rfxcom.com
Will do, but isn't this a plugin issue ?
Weren't you the owner of the plugin ?
Re: How to add TH9 - Viking 02038, 02035 to HomeSeer
Posted: Thu Dec 06, 2012 8:44 am
by jakkes
I updated the plugin yesterday, including an update for Homeseer.
It totally ruined my HS2 installation somehow..., no rfxmeter anymore, no KAKU devices.......
This i made a copy of the Homeseer Pro folder before upgrading the software...., after a restore of the folder all worked...
I don't know if the error was in the Homeseer upgrade, or in de RFXcom upgrade...