Home Automation Domotica Forum Europe, Bwired Forum

Hi all,


I'm having an issue with this module (have Active Home Pro + CM15 + easytouch 35 remote):

- when I first installed, local control with 2 switches for on/off & dim works perfect (this part is still working). I changed the adress to A9, and controll from PC and remote control worked perfect.
- 2 hours later, module does no longer respond to X10 commands from PC / remote. I have tried to reprogramm the adress (press program button for 5 seconds (blue LED on) => send adress => blue led off) which works, so X10 communication gets to module, but still no reaction when I try to switch on / off / dim remotely.

Thanks for your suggestions,

Kristof.

Finaly, seems to be interference from my computer monitor.

Bizarre that sending the adress works, all other commands not, but this morning lights switched on automatically (because computer was of).