Home Automation Domotica Forum Europe, Bwired Forum

Hello,

I have connected the OTG at my home network trough the TP-Link703N.
The monitor can connect to it and it all works good.

Now I would like to connect to the OTG using Telnet.
I have read about commands like 'PS=1'.
But I can't find out what I have to do to send commands.
I have tried Telnet, Putty and WINScp.

Is there something that I miss??

André

You said you can telnet to it. What happens when you type PS=1 (+ enter)?

Hello Greg,

If I telnet without a portnumber it cannot make a connection.
If I use the ip and portnumber I only see 'SSH-Dropbear_2011.54'
After typing PS=1 + enter nothing is happening.
No response, en the monitor also keeps on showing the normal messages

André

Greg,

Its working!!

What I did? To be true?
I don't know.

I gues it had to do someting with the TP-Link wr703n. I have made some changes tot ser2net.config. After some test, I have set it back to it's original. And since that moment PS=1 is working. I think there was a problem with sending de data to /dev/ttyUSB0.


Now I can start thinking about the way I want to work with the data.
Jumping in domotica?
Or trying to make a own way to get the data on my smartphone.

Thanks for the help so far!