Receive Oregon Scientific BWR102
Posted: Sat Apr 20, 2013 11:29 pm
I have some issues to get a reliable connection between the scale and the RFXtrx433 USB 433.92MHz Transceiver. I have been able to receive a few random measurements, but since a few days it stopped working completely.
The transceiver can without any problems communicate with other devices:
4/20/2013 9:12:58 PM= 08500A08B601005459
Packettype = TEMP
subtype = TEMP10 - TFA 30.3133
Sequence nbr = 8
ID = 46593
Temperature = 8.4 °C
Signal level = 5
Battery = OK
------------------------------------------------
4/20/2013 9:50:47 PM= 0710000843010150
Packettype = Lighting1
subtype = X10
Sequence nbr = 8
housecode = C
unitcode = 1
Command = On
Signal level = 5
The wireless connection between the scale and the remote unit works as expected.
The problem is certainly not related to distance, since both the scale and the transceiver a positioned next to each other.
What can be wrong, with my config?
================================================
Reset receiver/transceiver:0D 00 00 00 00 00 00 00 00 00 00 00 00 00
================================================
Get Status:0D 00 00 01 02 00 00 00 00 00 00 00 00 00
------------------------------------------------
0D010001025340000C2F01010000
Packettype = Interface Message
subtype = Interface Response
Sequence nbr = 1
response on cmnd = Get Status
Transceiver type = 433.92MHz
Firmware version = 64
Hardware version = 1.1
Undec off
X10 enabled
ARC enabled
AC enabled
HomeEasy EU enabled
Meiantech disabled
Oregon Scientific enabled
ATI disabled
Visonic disabled
Mertik disabled
AD disabled
Hideki enabled
La Crosse enabled
FS20 disabled
ProGuard disabled
BlindsT0 disabled
BlindsT1 disabled
AE disabled
RUBiCSON disabled
FineOffset disabled
Lighting4 disabled
RFU protocol 4 disabled
RFU protocol 5 disabled
RFU protocol 6 disabled
The transceiver can without any problems communicate with other devices:
4/20/2013 9:12:58 PM= 08500A08B601005459
Packettype = TEMP
subtype = TEMP10 - TFA 30.3133
Sequence nbr = 8
ID = 46593
Temperature = 8.4 °C
Signal level = 5
Battery = OK
------------------------------------------------
4/20/2013 9:50:47 PM= 0710000843010150
Packettype = Lighting1
subtype = X10
Sequence nbr = 8
housecode = C
unitcode = 1
Command = On
Signal level = 5
The wireless connection between the scale and the remote unit works as expected.
The problem is certainly not related to distance, since both the scale and the transceiver a positioned next to each other.
What can be wrong, with my config?
================================================
Reset receiver/transceiver:0D 00 00 00 00 00 00 00 00 00 00 00 00 00
================================================
Get Status:0D 00 00 01 02 00 00 00 00 00 00 00 00 00
------------------------------------------------
0D010001025340000C2F01010000
Packettype = Interface Message
subtype = Interface Response
Sequence nbr = 1
response on cmnd = Get Status
Transceiver type = 433.92MHz
Firmware version = 64
Hardware version = 1.1
Undec off
X10 enabled
ARC enabled
AC enabled
HomeEasy EU enabled
Meiantech disabled
Oregon Scientific enabled
ATI disabled
Visonic disabled
Mertik disabled
AD disabled
Hideki enabled
La Crosse enabled
FS20 disabled
ProGuard disabled
BlindsT0 disabled
BlindsT1 disabled
AE disabled
RUBiCSON disabled
FineOffset disabled
Lighting4 disabled
RFU protocol 4 disabled
RFU protocol 5 disabled
RFU protocol 6 disabled