Home Automation Domotica Forum Europe, Bwired Forum

Does anybody know if the Cresta DTX500 weather station is supported by the RFXCOM ? The external sensors transmit over 433Mhz, so I thought they would be picked up by the RFXCOM.

There are sensors for:
- rain
- wind strength and direction
- temp/humidity

Hope somebody can let me know so I can use it in my domotica system too.

Regards, Niels van Noort

here is the list of supported sensors http://www.rfxcom.com/oregon.htm

if the sensor is not listed it is most probably not supported.

b_weijenberg wrote:here is the list of supported sensors http://www.rfxcom.com/oregon.htm

if the sensor is not listed it is most probably not supported.

Thank you for that answer, I was aware of the list. At cresta it says:
TX-320
TS-34C
anemometer
UV sensor
Rain sensor

Which does not say a lot about the support of these sensors of the DTX500 which are temp, humidity, rain and wind (anemometer). So looking at this list I could read it as the sensors being supported. Does anybody know or have any experience with what cresta sensors and weather stations are supported ?