Home Automation Domotica Forum Europe, Bwired Forum

You use homeseer with the CTX35 to send the commands which do work? Then your device is definitely not broken. In my knowledge, the PMIX35 and CTX35 are the same (ok, almost). To read signals on the CTX35/PMIX35 you have to trigger the device to send the received X10 data to your comport with the $>...

I should'n bother to use v6 on a home network. Maarten is right.
Besides, ipv6 and v4 can be used besides each other without interference. My guess is that that will be the standard for the next decades. Otherwise there are tons of hardware worlwide that have to be changed

I collect all the data too. One of my remotes just sends the house/devicecode only once, while selecting this particular receiving device. After that the house/devicecode is never being sent again. But all following commands do work! So, the odd thing is that the house/devicecode is being remembered...

Hi. The problem lies not in the quality of the line reads. It's in the data itself. The commands from the device are received properly, but the house- and deviceaddress are not in the data.
Thanks anyway,

Guido

Hi all, Want to share the following problem. I've got a pmix35 with which i'm sending and receiving X10 data using c#. Works fine, so far. But i've got one small problem I like to figure out. - Every 500ms i'm polling the pmix with the RQ command. He responds just fine. - When i'm selecting the hous...

Vorig jaar ben ik gestart met de bouw van mn huis. Ben ook groot X10 fan, maar bouwen is duur genoeg. Dus wat heb ik gedaan; - overal verdiepte wandcontactdozen laten plaatsen. Kost nauwlijks meer dan standaard. - Bij elk raam, zowel binnen als buiten een 'loze' leiding laten plaatsen naar de meterk...