OTGW Nodo shop keeps on flashing/toggeling LED's
Posted: Thu Oct 03, 2019 9:01 pm
I have ordered the OTGW from NODO shop.
The OTGW is connected to an Daaldrop Combifort 24/80 and Chronotherm Modulation touch. When the OTGW is connected the yellow(burner on) led and first green led Keep on flashing on and off.
When I connect the Opentherm monitor software I see the status messages continue scrolling/toggeling by and 2 messages are continues changing bits. See below listing, this happens around 2 times every second.
Does anyone have an idea what is wrong.
I have both used the FTDI connection and ESPeasy connection with both the same results.
20:47:00.545599 T80000200 Read-Data Status: 00000010 00000000
- CH enable: disabled (0)
- DHW enable: enabled (1)
- Cooling enable: disabled (0)
- OTC active: not active (0)
- CH2 enable: disabled (0)
- Summer/winter mode: winter (0)
- DHW blocking: unblocked (0)
20:47:00.691644 BC000020E Read-Ack Status: 00000010 00001110
- Fault indication: no fault (0)
- CH mode: active (1)
- DHW mode: active (1)
- Flame status: flame on (1)
- Cooling status: not active (0)
- CH2 mode: not active (0)
- Diagnostic indication: no diagnostics (0)
- Electricity production: not active (0)
The OTGW is connected to an Daaldrop Combifort 24/80 and Chronotherm Modulation touch. When the OTGW is connected the yellow(burner on) led and first green led Keep on flashing on and off.
When I connect the Opentherm monitor software I see the status messages continue scrolling/toggeling by and 2 messages are continues changing bits. See below listing, this happens around 2 times every second.
Does anyone have an idea what is wrong.
I have both used the FTDI connection and ESPeasy connection with both the same results.
20:47:00.545599 T80000200 Read-Data Status: 00000010 00000000
- CH enable: disabled (0)
- DHW enable: enabled (1)
- Cooling enable: disabled (0)
- OTC active: not active (0)
- CH2 enable: disabled (0)
- Summer/winter mode: winter (0)
- DHW blocking: unblocked (0)
20:47:00.691644 BC000020E Read-Ack Status: 00000010 00001110
- Fault indication: no fault (0)
- CH mode: active (1)
- DHW mode: active (1)
- Flame status: flame on (1)
- Cooling status: not active (0)
- CH2 mode: not active (0)
- Diagnostic indication: no diagnostics (0)
- Electricity production: not active (0)