Hi all, I'm about to order a RFX meter with pulse unit for measuring electricity and water usage. Unfortunately my gas meter does not have any reflective number or other output so I have one input left. Any other usefull option to use the 3rd input as well? I was also wondering if it's possible to measure night power usage apart from daytime power usage. My meter has 3 yellow led's: blinking led, daytime & nighttime tarif so my meter can 'tell me' what's counter is running (day or night).
Thanks,
Jeroen
P.S. (the yellow led not readable issue has been solved right?)
P.P.S. This is what I will order: RFXMeter + 1 RFXPulse + adaptor / RFXPulse module / Photo sensor (ok for yellow led?)
RFX meter, advise needed.
Moderator: b_weijenberg
-
Jeroen Bartels
- Advanced Member
- Posts: 627
- Joined: Sun Jul 20, 2008 1:23 pm
- Location: Netherlands
-
Jeroen Bartels
- Advanced Member
- Posts: 627
- Joined: Sun Jul 20, 2008 1:23 pm
- Location: Netherlands
RFX meter, advise needed.
Not even one answer up till now. Can anybody help me out?
-
b_weijenberg
- Forum Moderator
- Posts: 1746
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
RFX meter, advise needed.
Jeroen,
Typical question for RFXCOM support.
Most LED's can be read now with the photo-sensor.
I have a special sensor in development to read the day/night tariff LED. Pieter is testing this sensor device (can have up to 3 sensors).
Bert
Typical question for RFXCOM support.
Most LED's can be read now with the photo-sensor.
I have a special sensor in development to read the day/night tariff LED. Pieter is testing this sensor device (can have up to 3 sensors).
Bert
