NSLU2 with rfxcom, xpl-perl

Post by **Kroonen** » Sat Nov 17, 2007 11:04 pm

Hi,

Arre there already people who has on a NSLU2 http://www.nslu2-linux.org/

rfxcom with xpl-perl or heyu for x10 working? it's cheap and it doen't cost much energy, and wtih a 2gb usb stick it's silent too

richard

Post by **b_weijenberg** » Sat Nov 17, 2007 11:10 pm

as weatherstation http://www.meteohub.de/joomla/index.php

Post by **Snelvuur** » Sat Nov 17, 2007 11:23 pm

xpl-perl does not work under nslu2, or you need to make a seperate package perhaps..

// Erik (binkey.nl)

Post by **DJF3** » Tue Nov 20, 2007 9:16 am

I like the idea of a USB memory stick.. They're VERY cheap and it's probably more than they NSLU needs for running software..

A few weeks back I talked to someone who has the NSLU with X10 Heyu running. Let me try to get more details. One nice thing is to use http://domus.link.co.pt/. This is a webinterface for Heyu on the NSLU. I'm about to get a NSLU. Now find some time to do testing

DJ

Post by **Brunt** » Sun May 17, 2009 9:20 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by snelvuur
 xpl-perl does not work under nslu2, or you need to make a seperate package perhaps..
<hr height="1" noshade id="quote"></blockquote id="quote">Who knows what worked back in 2007, but just to say that xpl-perl works fine with an rfxcom receiver using Debian 'lenny' on the LinkSys NSLU2. And indeed I'm using a memory stick as the only 'disk'.

Perhaps it was one of the other distributions for the NSLU2 (such as 'Unslung') that xpl-perl didn't work with. It's just perl, therefore as long as you can get perl and the required modules to work, then xpl-perl should work.