Username / password

Post by **TANE** » Tue Oct 06, 2009 10:38 pm

I found out that there is a username/password on my Rfxcom Ethernet device. Problem is I don't remember that anymore

I'm looking for reset option.
Is the username Admin?

both fields blank is not working.

<hr noshade size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html My Domotica Hardware Software

Post by **esschenk** » Tue Oct 06, 2009 10:44 pm

Hello

Strange mine login has no login and passwoord

just enter

Ed

Post by **TANE** » Tue Oct 06, 2009 10:50 pm

yes....and I always change that...

<hr noshade size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html My Domotica Hardware Software

Post by **TANE** » Tue Oct 06, 2009 11:08 pm

Question
What is the default User Name and Password to access the web configuration interface for a WiBox, Xport or WiPort running 6.x firmware?

Answer

By default there is no username or password defined, so leave the username and password fields blank and click OK to get to the web manager. If a telnet or enhanced password is defined, enter it into the password field and leave the username field blank and click OK to get to the web manager.

<hr noshade size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html My Domotica Hardware Software

Post by **TANE** » Tue Oct 06, 2009 11:09 pm

founded...:)blank username was the trick

<hr noshade size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html My Domotica Hardware Software

Post by **Snelvuur** » Tue Oct 06, 2009 11:32 pm

hehe , i had the exact same issue when i hooked it up to homeseer last week

// Erik (binkey.nl)