Eneco CT1021 electricity smeter + RFXCom 70088
Moderator: b_weijenberg
Eneco CT1021 electricity smeter + RFXCom 70088
Hoi,
I have the above electricity meter at home.
I was wondering if this is fase1 or fase3
If I do a google on CT1021 i find the following information:
http://www.xemex.be/index.php?page=prod_watchtalk
Mor info on my meter:
http://www.xemex.be/files/ct1021.pdf
It clearly states that thi sis a 3-fase meter so I will need the following 2 devices to measure my electricity right?:
- http://www.rfxcom.com/receivers.htm#80011 - master verion(because I allready have a 2-port LAN version)
- http://www.rfxcom.com/sensors.htm#70088
Just want to be sure I can use this before I order anything.
You can find pictures below of my electricity meter...
I have the above electricity meter at home.
I was wondering if this is fase1 or fase3
If I do a google on CT1021 i find the following information:
http://www.xemex.be/index.php?page=prod_watchtalk
Mor info on my meter:
http://www.xemex.be/files/ct1021.pdf
It clearly states that thi sis a 3-fase meter so I will need the following 2 devices to measure my electricity right?:
- http://www.rfxcom.com/receivers.htm#80011 - master verion(because I allready have a 2-port LAN version)
- http://www.rfxcom.com/sensors.htm#70088
Just want to be sure I can use this before I order anything.
You can find pictures below of my electricity meter...
Eneco CT1021 electricity smeter + RFXCom 70088
Ik ga bijna denken dat je in Rotterdam Nesselande woont. Veel plezier met je glasvezel aansluiting!
De sensor 70088 heb ik nog voor je liggen als je geinteresseerd bent. Het heeft overigens niets met 3 fase te maken. Je krijgt drie "sensoren" erbij om drie losse aansluitingen te meten. Denk aan het klikken op een fase draad die uit een van je gele (bovenaan in je foto's) pijpen te pakken. Ik neem aan dat er iets knippert op je meter (bijv 1000 knipperingen per kW, staat er vast op beschreven) en dan kun je beter voor de 70090 gaan icm 70093.
Alexander
De sensor 70088 heb ik nog voor je liggen als je geinteresseerd bent. Het heeft overigens niets met 3 fase te maken. Je krijgt drie "sensoren" erbij om drie losse aansluitingen te meten. Denk aan het klikken op een fase draad die uit een van je gele (bovenaan in je foto's) pijpen te pakken. Ik neem aan dat er iets knippert op je meter (bijv 1000 knipperingen per kW, staat er vast op beschreven) en dan kun je beter voor de 70090 gaan icm 70093.
Alexander
- Snelvuur
- Forum Moderator
- Posts: 3156
- Joined: Fri Apr 06, 2007 11:01 pm
- Location: Netherlands
- Contact:
Eneco CT1021 electricity smeter + RFXCom 70088
I almost got the same amount, but i only have 1 phase.. it looks like you only have 1 too.. i do have 3 big ass switches, but only 1 is actually hooked up.
// Erik (binkey.nl)
// Erik (binkey.nl)
Eneco CT1021 electricity smeter + RFXCom 70088
Is there a blinking LED or pulsecounter on the meter ?
Otherwise the solution Alexander suggest is better!
Also with this solutions it does not matter if you have a 3 phase installation and you have already the rfxcom lan receiver.
<hr noshade size="1"><font size="1">Pieter Knuvers
http://www.bwired.nl <i>Online House in the netherlands. Domotica, Home Automation.</i></font id="size1">
Otherwise the solution Alexander suggest is better!
Also with this solutions it does not matter if you have a 3 phase installation and you have already the rfxcom lan receiver.
<hr noshade size="1"><font size="1">Pieter Knuvers
http://www.bwired.nl <i>Online House in the netherlands. Domotica, Home Automation.</i></font id="size1">
- Fantic
- Member
- Posts: 201
- Joined: Sat Feb 21, 2009 2:11 pm
- Location: Loenen, UT, Netherlands
- Contact:
Eneco CT1021 electricity smeter + RFXCom 70088
This is not a 3 phase installation, the number of groups is to low and also the Earthleak and main switch are all single phase. So no need for any 3 phase measuring.
http://www.xemex.be/files/ct1021.pdfHere you can find the technical manual for this meter, it shows that the unit can be installed as a module on either a 1 phase or a 3phase base. In the eneco manual they state there is a blinking led for usage.
This is what you call a 3 phase installation
Regards, Maarten.
Never let a computer know you're in a hurry.
http://www.xemex.be/files/ct1021.pdfHere you can find the technical manual for this meter, it shows that the unit can be installed as a module on either a 1 phase or a 3phase base. In the eneco manual they state there is a blinking led for usage.
This is what you call a 3 phase installation
Regards, Maarten.
Never let a computer know you're in a hurry.
- Willem4ever
- Global Moderator
- Posts: 805
- Joined: Mon Oct 30, 2006 3:48 pm
- Location: Uithoorn / Netherlands
Eneco CT1021 electricity smeter + RFXCom 70088
The box below your electricity meter is it transparent ? if yes how many fuses do you see 1 or 3 .....
Eneco CT1021 electricity smeter + RFXCom 70088
@Bwired @Alexander
When I look at the meter I see what looks like 2 little LEDS with the description "1000 imp/kwh" (see picture)
But there is no actual light blinking.
So I am not sure if the blinking light thing will work
@Alexander
I live in Nesselande indeed ... what gave it away ... the blue KPN Fibre cable?
Or do you also live in Nesselande?
Anyway you say that it does not mather for me if I take the http://www.rfxcom.com/sensors.htm#70087 or the http://www.rfxcom.com/sensors.htm#70088 ?
If that is the case and the blinking light solution is not working for me ... what are you asking for the 70088?
@fantic,
The small manuel I have is not saying anything about LEDS blinking ...
What manuel are you talking about?
When I look at the meter I see what looks like 2 little LEDS with the description "1000 imp/kwh" (see picture)
But there is no actual light blinking.
So I am not sure if the blinking light thing will work
@Alexander
I live in Nesselande indeed ... what gave it away ... the blue KPN Fibre cable?
Or do you also live in Nesselande?
Anyway you say that it does not mather for me if I take the http://www.rfxcom.com/sensors.htm#70087 or the http://www.rfxcom.com/sensors.htm#70088 ?
If that is the case and the blinking light solution is not working for me ... what are you asking for the 70088?
@fantic,
The small manuel I have is not saying anything about LEDS blinking ...
What manuel are you talking about?
-
- Member
- Posts: 145
- Joined: Sat Jul 05, 2008 7:00 pm
- Location: Netherlands
Eneco CT1021 electricity smeter + RFXCom 70088
The LED is an infrared light, you can use the RFXPulse to count the amount of light pulses. It works, I have the same device.
There used to be a topic about the device on this forum, but unfortunately it was removed by a somewhat over-enthusiastic moderator.
Regards, PP
There used to be a topic about the device on this forum, but unfortunately it was removed by a somewhat over-enthusiastic moderator.
Regards, PP
Eneco CT1021 electricity smeter + RFXCom 70088
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by I-1</i>
@Alexander
I live in Nesselande indeed ... what gave it away ... the blue KPN Fibre cable?
Or do you also live in Nesselande?<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">I recognized the fiber installation to the right in your first picture and the central heating unit. Im in Nesselande Haag en Park. If you stop by at my place i can show you the equipment you are asking.
Alexander
@Alexander
I live in Nesselande indeed ... what gave it away ... the blue KPN Fibre cable?
Or do you also live in Nesselande?<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">I recognized the fiber installation to the right in your first picture and the central heating unit. Im in Nesselande Haag en Park. If you stop by at my place i can show you the equipment you are asking.
Alexander
Eneco CT1021 electricity smeter + RFXCom 70088
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by pieterpaul</i>
<br />The LED is an infrared light, you can use the RFXPulse to count the amount of light pulses. It works, I have the same device.
There used to be a topic about the device on this forum, but unfortunately it was removed by a somewhat over-enthusiastic moderator.
Regards, PP
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">Ok thats why I can not see a light blinking ...
<br />The LED is an infrared light, you can use the RFXPulse to count the amount of light pulses. It works, I have the same device.
There used to be a topic about the device on this forum, but unfortunately it was removed by a somewhat over-enthusiastic moderator.
Regards, PP
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">Ok thats why I can not see a light blinking ...
Eneco CT1021 electricity smeter + RFXCom 70088
@Alexander,
Do you have the samen meter as I have?
- ct1021
- ZCF120ABd
- ZMF120ABd
Do you have the samen meter as I have?
- ct1021
- ZCF120ABd
- ZMF120ABd
Eneco CT1021 electricity smeter + RFXCom 70088
I don't have the number at the moment what i have (ain't at home current), but you ask for the electricity meter i guess (eventhough you mention 3 devices?)? I don't have the same one. Another one that has a blinking led. But the device will not change. So i can show you the RFXCOM devices (I've the USB RFXCOM device btw not an ethernet one, but its the same idea) and Homeseer setup.
About the IR you guys did got me thinking: would the central heating meter also use IR? Its the blue device on the second and third photo
Alexander
About the IR you guys did got me thinking: would the central heating meter also use IR? Its the blue device on the second and third photo
Alexander
Eneco CT1021 electricity smeter + RFXCom 70088
@Alexander,
When are you home so I can ake a look at the goods?
And ofcourse what is your exact address (mail me)
I already sent you a 3 mails ... but I am not sure if you received this.
Thanks,
When are you home so I can ake a look at the goods?
And ofcourse what is your exact address (mail me)
I already sent you a 3 mails ... but I am not sure if you received this.
Thanks,
Eneco CT1021 electricity smeter + RFXCom 70088
mmmmmmmmm didn't got ANY mail. I've PM'd you.
Alexander
Alexander
Eneco CT1021 electricity smeter + RFXCom 70088
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Alexander</i>
<br />mmmmmmmmm didn't got ANY mail. I've PM'd you.
Alexander
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
It looks like I can not receive the PM either ...
I don't think mailing or PM' ing trough the forum works correct ...
Can you send me a direct mail to the mail adres listed in the picture below?
We can communicate by mail/offline regarding what you are selling and what meter you have
<br />mmmmmmmmm didn't got ANY mail. I've PM'd you.
Alexander
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
It looks like I can not receive the PM either ...
I don't think mailing or PM' ing trough the forum works correct ...
Can you send me a direct mail to the mail adres listed in the picture below?
We can communicate by mail/offline regarding what you are selling and what meter you have