REQ: RS232 cable diagram for CTX35

[Noel]

Today the postman delivered all my ordered Xanura stuff.

With it came the CTX35, and now I need a RS232 cable for it.
I've got all the bit's an peaces (plugs. cables, soldering gun, and yes I even found the solder back), but I'm missing a diagram on how to solder the RS232 cable!

Anyone here who can help me with the diagram for the RS232 cable?

Thank you.


---
Never start anything you can't fi

[Digit]

Does this help you:

[Noel]

Hi Digit,

it does a bit, but I also need the PC (TXD/RXD and ground) site.. Or are they on the same pins?

---
Never start anything you can't fi

[Digit]

This is PC side:

[Noel]

That will do

Thank you.

---
Never start anything you can't fi

[Noel]

So.. Basically.
Pin 5 PC (GND) to pin 5 CTX35 (GND)
Pin 3 PC (TXD) to pin 2 CTX35 (TXD)
Pin 2 PC (RXD) to pin 3 CTX35 (RXD)

OR.. should it be?

Pin 5 PC (GND) to pin 5 CTX35 (GND)
Pin 3 PC (TXD) to pin 3 CTX35 (RXD)
Pin 2 PC (RXD) to pin 2 CTX35 (TXD)

Help.. It's been a while back :/

---
Never start anything you can't fi

[Digit]

I always go here when i forget about RS232:
http://www.lammertbies.nl/comm/cable/RS-232.html

[Bwired]

The last one!
Pin 5 PC (GND) to pin 5 CTX35 (GND)
Pin 3 PC (TXD) to pin 3 CTX35 (RXD)
Pin 2 PC (RXD) to pin 2 CTX35 (TXD)

[Noel]

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Bwired</i>
<br />The last one!
Pin 5 PC (GND) to pin 5 CTX35 (GND)
Pin 3 PC (TXD) to pin 3 CTX35 (RXD)
Pin 2 PC (RXD) to pin 2 CTX35 (TXD)

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">Grrrrrr.. Just finished doing it the 1st way :/
I've never been good gambling.
---
Never start anything you can't fi

[Digit]

Well, at least now you'll never forget it anymore...[:D]