rfxcom doesnt see the kaku doorbel in homeseer.
i did cleared heard sensors and then tried to add new, but nothing to see after i pushed the button.
in homeseer log shows:19-10-2008 13:25:36 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:36 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:37 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F7887
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F58A7
19-10-2008 13:25:38 - RFXCOM - (RecRxChar) packet received: 20708F7887
and in rfreciever it shows the doorbel too.another way to add the doorbell?
doorbel
Moderator: b_weijenberg
-
b_weijenberg
- Forum Moderator
- Posts: 1746
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
doorbel
The doorbel transmits an X10 code. As you have set the house code to "B" it is received as B8.
Enable the X10 receiving of house code B (status only)
Create an X10 device B8
Enable the X10 receiving of house code B (status only)
Create an X10 device B8
doorbel
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by b_weijenberg</i>
<br />The doorbel transmits an X10 code. As you have set the house code to "B" it is received as B8.
Enable the X10 receiving of house code B (status only)
Create an X10 device B8
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">that`s it! thank u verry much![:)]
<br />The doorbel transmits an X10 code. As you have set the house code to "B" it is received as B8.
Enable the X10 receiving of house code B (status only)
Create an X10 device B8
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">that`s it! thank u verry much![:)]