mx record settings for nitroserve (Solved)

Post by **TANE** » Sat Sep 26, 2009 10:25 pm

yesterday I have changed some setting in my zonefile

result is that my e-mail is not working since yesterday.

the settings that I can change for this are

Host: @
Record type: MX
Prioriteit: 10
Waarde: mail.nitroserve.nl
Domein: mydomain

what are the correct settings for the mail?

<hr noshade size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html My Domotica Hardware Software

Post by **Willem4ever** » Sun Sep 27, 2009 12:33 am

should be something like;

yourdomain in mx 10 mail.nitroserve.nl.

Pay attention to the trailing dot !

Do keep in mind the propagation delay when changing records. It can take up to 24 hours before it is fully propagated.

Post by **TANE** » Sun Sep 27, 2009 12:47 am

Last Friday i added a dns record for webmail...that was forwarding to fastmail.fm...grrr...that was the problem

<hr noshade size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html My Domotica Hardware Software

Post by **Edwin2008** » Sun Sep 27, 2009 9:00 am

bit off topic but if your isp supports batched smtp than you won't miss an e-mail when server is down for maintenance.

Post by **TANE** » Sun Sep 27, 2009 2:15 pm

yes you are correct I received all the mails afterwards.

<hr noshade size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html My Domotica Hardware Software

Post by **Bwired** » Sun Sep 27, 2009 3:18 pm

Next time grab a screenshot before you edit [:D]

<hr noshade size="1">Pieter Knuvers
http://www.bwired.nl Online House in the netherlands. Domotica, Home Automation.