Hello Everybody,I need some help in understanding wordings and philosophy of Zwave network!!
I have installed a home network with HomePro ZRP230 appliance device to control and program my electric radiators and Duwi Jalousie Blind to control the roller blind.
This now works well, I had some problems on my PC which made the control erratic and after installing again HomeSeer on another computer, it work.
In HomeSeer, the Zstick is the primary controller.
Now, I like to have also individual remote control to open and close the blind (Budendorff) on the roof of the veranda, the Duwi switch is not accessible or the lounge blind to watch the TV.
I have try to associate the Duwi switch with various remote control like the HomePro ZTH200 -(6 Buttons) or the Duwi ZW FB 10 (10 Buttons) or the Aeon Minimote (4 Buttons) and none work.
I try also the HomePro ZRP230 Appliance device but I had the same problem.
I set the remote controls to factory default and also try to remove the device from the remote control, just in case but did not manage.
What I am doing wrong?
Should I use HomeSeer to associate or "copy" or duplicate, secondary control, etc ......... the Zstick into the Remote Control.
But in this case, what do I do with the device I do not want to control with this particular remote control I have more that 30 node registered in the Zstick and I want to put only the blind for example in the 10 Key remote control .
Thanks for your help
Patrick
