Jeenode + roomboard: switching output from Homeseer
Moderator: Mdamen
Re: Jeenode + roomboard: switching output from Homeseer
Yes, but...
It would mean a complete 'makeover' of both the sketch and the Homeseer scripts.
It would mean a complete 'makeover' of both the sketch and the Homeseer scripts.
Re: Jeenode + roomboard: switching output from Homeseer
Oke...so it actually means writing new script and sketch. And i am no programmer so that is impossible for me to do....
IF someone wants to put in the effort to do this, I (and many others) are very greatfull....
but i think i should open a new topic for this issue??
Iwan
IF someone wants to put in the effort to do this, I (and many others) are very greatfull....
but i think i should open a new topic for this issue??
Iwan
greetz,
Iwan
Iwan
Re: Jeenode + roomboard: switching output from Homeseer
Using Arduino's or comparable cannot be done without at least a bit of programming experience, so I don't get it...
You can open a new topic, but don't expect too much - speaking for myself, I'm not gonna invest time in "Arduino via USB" Homeseer Integration when JeeNode & Homeseer integration already exists.
And in my opinion, a JeeNode with RF is much more suitable as sensor node as the "original" Arduino. If I were you, I would get hold of 2 JeeNodes, put the Arduino on Marktplaats (or keep it for misc. testing purposes would be a better choice) and you (and those many others) are almost done... am I right or not?
If not, please say so
You can open a new topic, but don't expect too much - speaking for myself, I'm not gonna invest time in "Arduino via USB" Homeseer Integration when JeeNode & Homeseer integration already exists.
And in my opinion, a JeeNode with RF is much more suitable as sensor node as the "original" Arduino. If I were you, I would get hold of 2 JeeNodes, put the Arduino on Marktplaats (or keep it for misc. testing purposes would be a better choice) and you (and those many others) are almost done... am I right or not?
If not, please say so
Re: Jeenode + roomboard: switching output from Homeseer
oke, that is a real option, but the next question will be....What IF i only need a jeenode with temp sensor and not a whole roomboard with motion detection and light.Digit wrote:Using Arduino's or comparable cannot be done without at least a bit of programming experience, so I don't get it...
You can open a new topic, but don't expect too much - speaking for myself, I'm not gonna invest time in "Arduino via USB" Homeseer Integration when JeeNode & Homeseer integration already exists.
And in my opinion, a JeeNode with RF is much more suitable as sensor node as the "original" Arduino. If I were you, I would get hold of 2 JeeNodes, put the Arduino on Marktplaats (or keep it for misc. testing purposes would be a better choice) and you (and those many others) are almost done... am I right or not?
If not, please say so
Iwan
greetz,
Iwan
Iwan
Re: Jeenode + roomboard: switching output from Homeseer
Buy the thermo plug (board only) and a DS18B20, more details here
Rene.
Re: Jeenode + roomboard: switching output from Homeseer
Rene wrote:Buy the thermo plug (board only) and a DS18B20, more details here
oke, but what about humid sensor, because it would be perfect to have temp and humid
thanks, this option is a very good one.
Iwan
greetz,
Iwan
Iwan
Re: Jeenode + roomboard: switching output from Homeseer
SHT11, S555TH can do that.
For SHT11 you could use the Room Board.
Another resource: http://www.jansipke.nl/measuring-temper ... -a-jeenode
Including sketch
I found that one with the help of an Internet search engine
For SHT11 you could use the Room Board.
Another resource: http://www.jansipke.nl/measuring-temper ... -a-jeenode
Including sketch
I found that one with the help of an Internet search engine
Re: Jeenode + roomboard: switching output from Homeseer
thank you very much......i use an old search engine, so it did'nt popupDigit wrote:SHT11, S555TH can do that.
For SHT11 you could use the Room Board.
Another resource: http://www.jansipke.nl/measuring-temper ... -a-jeenode
Including sketch
I found that one with the help of an Internet search engine
i have looked at the link, but the are connecting a extra/different radio. type RX868 for recieving the data from a external (big) temp/humid sensor.
what i actually wanted was like the jeenode roomboard without pir and light. (without having to buy the roomboard and pull the other 2 modules of the board.
Iwan
greetz,
Iwan
Iwan
Re: Jeenode + roomboard: switching output from Homeseer
i finally get the picture.......
you have the jeenode...and as extra you have the roomboard that you plug intoo the jeenode to make 1 set. So you have to buy these 2 things seperatly.
so i can take a jeenode and a seperate temp and humid sensor to plug it into the jeenode.....
am i right??
Iwan
you have the jeenode...and as extra you have the roomboard that you plug intoo the jeenode to make 1 set. So you have to buy these 2 things seperatly.
so i can take a jeenode and a seperate temp and humid sensor to plug it into the jeenode.....
am i right??
Iwan
greetz,
Iwan
Iwan
Re: Jeenode + roomboard: switching output from Homeseer
Hello,
Yes right thats all you need
http://jeelabs.com/products/jeelink
http://jeelabs.com/products/jeenode
http://jeelabs.com/products/room-board
Maybe you can ask Jean if you can buy only the roomboard with the Sht11
else you can buy only the roomboard pcb and buy the sht11 somewhere else
http://cgi.ebay.com/SHT11-Humidity-Temp ... _500wt_922
Good luck
Ed
Yes right thats all you need
http://jeelabs.com/products/jeelink
http://jeelabs.com/products/jeenode
http://jeelabs.com/products/room-board
Maybe you can ask Jean if you can buy only the roomboard with the Sht11
else you can buy only the roomboard pcb and buy the sht11 somewhere else
http://cgi.ebay.com/SHT11-Humidity-Temp ... _500wt_922
Good luck
Ed
Re: Jeenode + roomboard: switching output from Homeseer
this is the answert i was looking/hoping for....esschenk wrote:Hello,
Yes right thats all you need
http://jeelabs.com/products/jeelink
http://jeelabs.com/products/jeenode
http://jeelabs.com/products/room-board
Maybe you can ask Jean if you can buy only the roomboard with the Sht11
else you can buy only the roomboard pcb and buy the sht11 somewhere else
http://cgi.ebay.com/SHT11-Humidity-Temp ... _500wt_922
Good luck
Ed
thanks, Ed
greetz,
Iwan
Iwan